Prepare Top Cisco 300-510 Exam Study Guide Practice Questions Edition
Go to 300-510 Questions - Try 300-510 dumps pdf
How to study the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
For the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco's authorized learning partners teach instructor-led classes all over the world. E-Learning solutions are provided by Cisco for exam preparation via self-paced online courses. Students are highly encouraged to join Cisco's Certification community where they can join students from all over the world and learn together. After taking all the official training courses, 300-510 SPRI practice exams are a must to get a proper understanding of exam format and question types. For further exam self-study materials, refer to the links down below:
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to Cisco's Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
More about 300-510 Exam
If you target the CCNP Service Provider, the Cisco 300-510 test comes second after 350-501 exam, normally called the core validation. 300-510 test, on the other hand, is among two other concentration tests, namely, the Cisco 300-515 and 300-535. To add more, 300-510 exam is into topics like routing protocols, MPLS, segment routing, and policy language. The duration set aside for it is 1.5 hours and the amount to pay during registration is $300. Sadly, Cisco does not give any report regarding the least score that takers of this test should get for the sake of becoming certified. So, striving for high marks should be your aim. However, in case your attempt is not successful the first time, there is a chance to redo the test once five days have elapsed from the date you attempted it.
The best audience for exam 300-510 include network administrators, network designers, project managers, and system engineers, among other specialists.
NEW QUESTION 21
Refer to the exhibit.
A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
NEW QUESTION 22
Refer to the exhibit.
While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How should the engineer solve the issue?
- A. Set up a priority different than 0 in the interface.
- B. Set the network type in S1/0 to point-to-point.
- C. Modify the router ID to be the interface IP on the serial.
- D. Modify the IP address or mask of the interface to a valid one.
Answer: D
NEW QUESTION 23
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. local preference
- B. origin
- C. weight
- D. MED
Answer: D
NEW QUESTION 24
Refer to the exhibit.
The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?
- A. 192.168.3.2
- B. 192.168.1.6
- C. 192. 168.1.2
- D. 192.168.3.6
Answer: C
NEW QUESTION 25 
Refer to the exhibit. CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core. What step can be done to troubleshoot the issue?
- A. Confirm that IS-IS is running with metric-style narrow.
- B. Configure BGP between CE and PE routers.
- C. Verify the MPLS LSPs.
- D. Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.
Answer: A
NEW QUESTION 26
Refer to the exhibit.
A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?
- A. Configure a sham link between R4 and R5 to support summarization within Area 2
- B. Move R4 and R5 in separate areas as now they maintain the same link-state database
- C. Clear link-state database on both R4 and R5 routers for summarization to work
- D. Remove summarization configuration on R5 and configure it on R4
Answer: B
NEW QUESTION 27
Refer to the exhibit. After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?
- A. Routes directly attached to AS 65517 have the local preference set to 150.
- B. Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied.
- C. Routes that have originated through AS 65517 have the local preference set to 150.
- D. Routes that have passed through AS 65517 have the local preference set to 150.
Answer: D
NEW QUESTION 28
Which difference should be considered when intradomain or interdomain multicast routing is implemented?
- A. Interdomain multicast routing relies on PIM-DM and intradomain multicast routing relies on PIM- SM.
- B. Interdomain multicast routing requires an IS-IS or OSPF neighbor relationship between the domains but intradomain multicast routing requires only BGP Questions & Answers PDF P-57
- C. interdomain multicast routing uses BIDR-PIM to establish neighbor relationships between AS and interdomain multicast routing uses MSDP
- D. A network uses intradomain multicast routing without interdomain routing but networks that use interdomain multicast routing must also apply intradomain routing
Answer: D
NEW QUESTION 29
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 30 
Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
- A. Set each specific route in the AGGRO policy to remove instead of suppress-route
- B. Filter the routes on the receiving router
- C. Set each specific route in the AGGRO policy to drop instead of suppress-route
- D. Configure the summary-only keyword on the aggregate command
Answer: D
NEW QUESTION 31
Refer to the exhibit.
An MPLS core network has connectivity issues R4 has failed. It impacts traffic loss between R1 and R8. Customers report no access to their file servers, which delays their transformation work. Which quick action resolves the issue until R4 recovers?
- A. Implement Link and Node protection on routers R2 and R7.
- B. Configure IBGP full mesh for faster convergence.
- C. Disable traffic engineering so that traffic prefers the IGP path
- D. Enable MPLS TE fast reroute on router R1 and Link and Node protection on router R2.
Answer: D
NEW QUESTION 32
A network engineer is troubleshooting OSPF multiare A. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?
- A. routing process enabled by default on all interfaces
- B. show ip ospf topology command
- C. DR support for topology management
- D. hierarchical CLI
Answer: D
Explanation:
OSPF Hierarchical CLI and CLI Inheritance
Hierarchical CLI is the grouping of related network component information at defined hierarchical levels such as at the router, area, and interface levels. Hierarchical CLI allows for easier configuration, maintenance, and troubleshooting of OSPF configurations. When configuration commands are displayed together in their hierarchical context, visual inspections are simplified. Hierarchical CLI is intrinsic for CLI inheritance to be supported.
With CLI inheritance support, you need not explicitly configure a parameter for an area or interface. In the software, the parameters of interfaces in the same area can be exclusively configured with a single command, or parameter values can be inherited from a higher hierarchical level-such as from the area configuration level or the router ospf configuration levels.
More information: https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/routing/71x/b-routing-cg-ncs5500-71x/b-routing-cg-ncs5500-71x_chapter_011.html#con_1059437 Reference:
guide/rc40xr12k_chapter4.html#con_1059437
NEW QUESTION 33
Refer to the exhibit.
All routers on this network have been configured with P1M-SM and R1 is the rendezvous point However, when asymmetric routing is implemented to modify link usage the network begins to drop certain multicast traffic Which action corrects the problem?
- A. Add a static Mroute for routes that are failing.
- B. Configure the routers to use PIM-DM instead of PIM-SM.
- C. Place the routes affected by asymmetric routing in a VRF.
- D. Remove the asymmetric routing and use spanning tree to manage link usage.
Answer: A
NEW QUESTION 34
Refer to the exhibit.
An engineer is troubleshooting IS-IS configuration between two areas. IS-IS Area-A network 30.1.1.0/24 is leaked into IS-IS Area-B. R2 is failing to filter the route updates from network 10.1.1.0/24. Which configuration must the engineer apply to resolve the issue?
- A. R1(config)# ip prefix-list List2 seq 5 deny 10.1.1.0/24
R1(config)# interface fastethernet 0/0
R1(config-if)# ip router isis 100
R1(config-if)# router isis 100
R1(config-router)# distribute-list gateway List2 in
R (config-if)# router isis 150
R1(config-router)# distribute-list route-map Map1 in - B. R2(config)# ip prefix-list List1 seq 3 deny 10.1.1.0/24
R2(config)# ip prefix-list List1 seq 5 permit 30.1.1.0/24 ge 25 1e
R2(config)# ip prefix-list List1 seq 10 permit 0.0.0.0/le 32
R2(config)# interface fastethernet 0/0
R2(config-if)# ip router isis 122
R2(config-if)# router isis 122
R2(config-router)# distribute-list prefix List1 in - C. R2(config)# ip prefix-list List2 seq 5 deny 10.1.1.0/24
R2(config)# interface fastethernet 0/0
R2(config-if)# ip router isis 100
R2(config-if)# router isis 100
R2(config-router)# distribute-list gateway List2 in - D. R2(config)# access-list 101 deny ip any 10.1.1.0 0.0.0.127
R2(config)# access-list 101 permit ip any 30.1.1.0 0.0.0.63
R2(config)# access-list 101 deny ip any 0.0.0.0 0.0.0.0
R2(config)# interface fastethernet 0/0
R2(config-if)# ip router isis 121
R2(config-if)# router isis 121
R2(config-router)# distribute-list 101 in
Answer: A
NEW QUESTION 35
Refer to the exhibit.
Routers R1, R2. R3, and R4 have been configured to run OSPF. and router R5 is running EIGRP Traffic from R1 to R5 is expected to pass via R4. but OSPF routing has calculated the best path via R3. Which action corrects the problem?
- A. Reconfigure R1 in Area 0.
- B. Configure R1 with a static route to the R5 networks and set R5 as the next hop.
- C. Change the metric-type value on R3 to 2.
- D. Configure R3 to use metric-type 1 with a higher metric than R4.
Answer: C
NEW QUESTION 36
Refer to the exhibit.
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
- A. The BGP session comes up between R1 and R3, but not between R1 and R2.
- B. The BGP session comes up between R1 and R2, but not between R1 and R3.
- C. The BGP session comes up between R1 and R2 and between R1 and R3.
- D. The BGP session does not come up between R1 and R2 and between R1 and R3.
Answer: C
NEW QUESTION 37
Refer to the exhibit.
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
- A. The BGP session comes up between R1 and R3, but not between R1 and R2.
- B. The BGP session comes up between R1 and R2, but not between R1 and R3.
- C. The BGP session comes up between R1 and R2 and between R1 and R3.
- D. The BGP session does not come up between R1 and R2 and between R1 and R3.
Answer: C
NEW QUESTION 38
Refer to the exhibit.
Refer to the exhibit. Customer A is a small media company with two offices connected by a 512 Kbps line. Their NY office is connected to several external partners by static routes on router R3. VoIP services use VoIP codec G729 Users reported poor voice quality and slow data transfer between the offices A network engineer configured ip tcp header-compression iphc-format on R2 and R3 routers Which additional action must the engineer take to fix the issue?
- A. Change the OSPF router ID on either router so that the router IDs are unique.
- B. Configure the BGP routing protocol between R2 and R3 to control route propagation.
- C. Configure the ip ospf I area O command under Serial 1/1 interfaces on R2 and R3 to avoid routing loops
- D. Configure the summary-address 10.10.0.0 255.255.240.0 command on R3 to optimize OSPF communication
Answer: D
NEW QUESTION 39
For which reason can two BGP peers fail to establish a neighbor relationship?
- A. Their BGP send-community strings are misconfigured
- B. Their BGP timers are mismatched
- C. Their remote-as numbers are misconfigured
- D. They are both activated under an IPv4 address family
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 40
Refer to the exhibit
An engineer is configuring service traffic from router R1 to R6 as shown. Which additional configuration must the engineer implement so that the LDP and SR domains will participate and interwork with each other?
- A. Router2(config)# segment-routing
Router2(config-sr)# sr mapping-server
Router2(config-sr-ms)# ldp-sid-map
Router2(config-sr-ms-map)# address-family ipv4
Router2(config-sr-ms-map-af)# 10.1.1.1/32 500 range 50 - B. Router2(config)# segment-routing
Router2(config-sr)# mapping-server
Router2(config-sr-ms)# prefix-sid-map
Router2(config-sr-ms-map)# address-family ipv4
Router2(config-sr-ms-map-af)# 10.1.1.1/32 500 range 50 - C. Router2(config)# segment-routing
Router2(config-sr)# ldp mapping-server
Router2(config-sr-ms)# prefix-sid-map
Router2(config-sr-ms-map)# address-family ipv4
Router2(config-sr-ms-map-af)# 2.2.2.2/32 500 range 40 - D. Router2(config)# segment-routing
Router2(config-sr)# ldp mapping-server
Router2(config-sr-ms)# prefix-sid-map
Router2(config-sr-ms-map)#
Router2(config-sr-ms-map-af)# 2.2.2.2/32 500 range 4
Answer: B
NEW QUESTION 41
Refer to the exhibit.
Refer to the exhibit. A network engineer is investigating a report of packet drops between the branch site and the central site.
The two sites are connected via OSPF and RSVP-TE tunnels.
Traffic from the central site to the branch site is passing normally.
Technicians at both sites successfully ping the loopback IP addresses on routers R1 and R2.
Which configuration corrects the packet-drop problem?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION 42
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/47868-ospfdb9.html
NEW QUESTION 43
Refer to the exhibit.
Which tree does multicast traffic follow?
- A. shared tree
- B. MDT voice
- C. MDT default
- D. source tree
Answer: C
NEW QUESTION 44
Refer to the exhibit. Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R4
- B. R2
- C. R5
- D. R3
Answer: B
NEW QUESTION 45
......
Free CCNP Service Provider 300-510 Exam Question: https://www.passexamdumps.com/300-510-valid-exam-dumps.html
Dumps Practice Exam Questions Study Guide for the 300-510 Exam: https://drive.google.com/open?id=1GCEwRmuhw8pIA7wGR_ee-sED-XPPikEl
