[Mar-2022] Latest 300-510 Exam Dumps for Pass Guaranteed
Reliable CCNP Service Provider 300-510 Dumps PDF Mar 24, 2022 Recently Updated Questions
How to Prepare for Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
Preparation Guide for Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
Introduction
Cisco Systems located in San Jose, California in the heart of Silicon Valley is an American multinational technology corporation. Cisco designs produce and sell hardware, software, telecommunications equipment, and other high-tech services and products for networking. Cisco specializes in unique tech markets, such as the Internet of Things (IoT), domain security, and energy management, through its various acquired subsidiaries, such as OpenDNS, Webex, Jabber, and Jasper.
A world of opportunity is being created by Cisco technology. With Cisco's Training and Certifications, one can power their career with a new learning portfolio that opens opportunities for developers as well as network engineers. A direct path to your technology career ambitions is provided by Cisco's training and certification program. IT technologies are driving the transformation of Cisco's training and qualification programs to prepare teachers, engineers, and developers of software for success in the most important positions in the industry.
Explore the power of the dynamic culture of the Cisco Learning Network to jump-start your certification and lifelong learning goals. Get useful tools for IT training for all Cisco certifications. Access research tools for IT certification, CCNA practice exams, IT wages, and finding IT work.
This exam guide is intended to help you determine if you can complete the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam successfully. This guide includes information on the certification test target audience, recommended preparation and documentation, and a full list of exam targets, all to help you obtain a passing grade. To increase your chances of passing the test, different types of 300-510 SPRI practice exams and 300-510 SPRI exam dumps are the best option.
Introduction to Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
It is a 90-minute test affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam tests the candidate's knowledge of integrating VPN services, including Layer 2, Layer 3, and IPv6, from the service provider. Different types of 310-510 SPRI practice test helps the students to prepare for the exam.
NEW QUESTION 43
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. R1 prefer to use R5 as the next hop to reach R4
- B. All links have equal cost if the default metric is used
- C. R4 prefer to reach R5 using R1 as the next hop
- D. R5 prefers to use R4 as the next hop for all routes
Answer: B
NEW QUESTION 44 
Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
- B. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- C. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- D. Router 2 uses router 1 as the next hop for 192.168.0.0/24
Answer: B
NEW QUESTION 45
Refer to the exhibit.
Routers R1, R2. R3, and R4 have been configured to run OSPF. and router R5 is running EIGRP Traffic from R1 to R5 is expected to pass via R4. but OSPF routing has calculated the best path via R3. Which action corrects the problem?
- A. Configure R3 to use metric-type 1 with a higher metric than R4.
- B. Configure R1 with a static route to the R5 networks and set R5 as the next hop.
- C. Change the metric-type value on R3 to 2.
- D. Reconfigure R1 in Area 0.
Answer: C
NEW QUESTION 46
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only ASM is permitted
- B. Only the default SSM range is permitted
- C. Only the administratively scoped range is permitted
- D. Only GLOP is permitted
Answer: B
NEW QUESTION 47
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- B. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- C. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
Answer: C
NEW QUESTION 48
DRAG DROP
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Select and Place:
Answer:
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html
NEW QUESTION 49
Refer to the exhibit.
Which statement about this configuration is true?
- A. Router 1 sends and receives multiple best paths from neighbor 192.168.1.1
- B. Router 1 sends up to two paths to neighbor 192.168.1.1 for all routes
- C. Router 1 receives up to two paths from neighbor 192.168.1.1 for all routes in the same AS
- D. Router 1 receives only the best path from neighbor 192.168.1.1
Answer: A
NEW QUESTION 50
Refer to the exhibit.
A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.
Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 51
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/47868-ospfdb9.html
NEW QUESTION 52
Refer to the exhibit.
Why is neighbor 10.1.5.5 stuck in "2WAY" state?
- A. OSPF parameters (Area ID or hello interval) are mismatched between R2 and 10.1.5.5
- B. OSPF authentication has failed between R2 and 10.1.5.5
- C. Router ID 10.1.5.5 is not reachable from R2
- D. It is an expected behavior when OSPF network type is broadcast
Answer: D
NEW QUESTION 53
What are two differences between OSPF and IS-IS? (Choose two.)
- A. OSPF elects a DR and a BDR, and IS-IS elects a DIS.
- B. OSPF is a link-state routing protocol, and IS-IS is a distance-vector routing protocol.
- C. OSPF uses a router ID to identify a router, and IS-IS uses a system ID.
- D. Unlike IS-IS routers, an OSPF router belongs to only one area in addition to the backbone area.
- E. Unlike OSPF. IS-IS supports virtual links.
Answer: A,C
NEW QUESTION 54 
Refer to the exhibit. A network operator is getting the route for 10.11.11 0/24 from two upstream providers on
#XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of
10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
- A. lower local preference on the prefix coming from 192.168.0.2
- B. weight of 100 on the prefix coming from 192.168.0.1
- C. weight of 0 on the prefix coming from 192.168.0.2
- D. higher local preference on the prefix coming from 192.168.0.1
Answer: D
NEW QUESTION 55
Refer to the exhibit.
A network engineer implemented this segment routing configuration. Which statement about the output is true?
- A. The default segment routing global block range is being used on this device.
- B. The device must be reloaded for these ranges to be allocated and used.
- C. This range conflicts with the segment routing local block range.
- D. A nondefault segment routing global block range is being used on this device.
Answer: D
NEW QUESTION 56
Refer to the exhibit.
A network engineer implemented this segment routing configuration. Which statement about the output is true?
- A. The default segment routing global block range is being used on this device.
- B. The device must be reloaded for these ranges to be allocated and used.
- C. This range conflicts with the segment routing local block range.
- D. A nondefault segment routing global block range is being used on this device.
Answer: D
NEW QUESTION 57
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.
Answer:
Explanation:
NEW QUESTION 58
Refer to the exhibit.
P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other. Which action fixes the issue?
- A. Change HMAC-MD5 to MD5
- B. Change HMAC-MD5 to HMAC-SHA1-12
- C. Configure the send and accept lifetime under key 1
- D. Change HMAC-MD5 to HMAC-SHA1-20
Answer: C
NEW QUESTION 59
Refer to the exhibit.
An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?
- A. Router 1 must have the keyword subnets included in the redistribution command for all EIGRP routes to be redistributed.
- B. Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.
- C. Router 1 must have the keyword included in the redistribution command for all EIGRP routes to be redistributed.
- D. Router 1 must have the keyword 1 included in the redistribution command for all EIGRP routes to be redistributed.
Answer: A
NEW QUESTION 60
Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Software?
- A. ipv4 pim bidir-enable
- B. multicast-routing
- C. Ip pim bidlr-enable
- D. ip pim bidir ip
Answer: C
NEW QUESTION 61
You have configured MSDP peering between two autonomous systems that pass traffic between two sites, but the peering has failed to come up.
Which task do you perform to begin troubleshooting the problem?
- A. Verify that multicast has been disabled globally
- B. Verify that both source interfaces are reachable from both peers
- C. Verify that PIM-DM is configured on the source interface
- D. Verify that the two MSDP peers allow asymmetric routing
Answer: B
NEW QUESTION 62
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- B. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- C. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
- D. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
Answer: D
NEW QUESTION 63
Refer to the exhibit.
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers cannot authenticate with one another.
- B. The two routers have the same area ID.
- C. The two routers have the same network ID.
- D. The two routers have different IS-types.
Answer: A
NEW QUESTION 64
......
Difficulty in Writing Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
The Implementation of the Cisco Service Provider VPN Services (300-510) certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct 300-510 SPRI practice test.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. PassExamDumps have the most up to date 300-510 SPRI exam dumps that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
Latest 2022 Realistic Verified 300-510 Dumps: https://www.passexamdumps.com/300-510-valid-exam-dumps.html
Pass Your Cisco 300-510 Exam with Correct 104 Questions and Answers: https://drive.google.com/open?id=1LBXCjmpLaLiLj6TzFVmt7Ck9Wjm_zlrW
