2024 New Training Course NSE6_FAZ-7.2 Tutorial Preparation Guide
Dumps of NSE6_FAZ-7.2 Cover all the requirements of the Real Exam
NEW QUESTION # 14
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To migrate the archive logs to the new ADOM
- B. To reset the ADOM disk quota enforcement to its default value
- C. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- D. To remove the analytics logs of the device from the old database
Answer: C
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 15
Which two methods can you use to restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Limit access to specific virtual domains.
- B. Use administrator profiles.
- C. Fabric connectors to external LDAP servers.
- D. Configure trusted hosts.
Answer: B,D
Explanation:
To restrict administrative access on FortiAnalyzer, two effective methods are using administrator profiles and configuring trusted hosts. Administrator profiles allow for defining the level of access and permissions for different administrators, controlling what each administrator can seeand do within the FortiAnalyzer unit.
Configuring trusted hosts enhances security by limiting administrative access to specified IP addresses, ensuring that administrators can only connect from approved locations or networks, thus preventing unauthorized access from outside specified subnets or IP addresses.References:FortiAnalyzer 7.4.1 Administration Guide, "Administrators" and "Trusted hosts" sections.
NEW QUESTION # 16
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A local wildcard administrator account
- B. LDAP servers IP addresses added as trusted hosts
- C. One or more remote LDAP servers
- D. An administrator group
Answer: C,D
Explanation:
To allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group, you must configure one or more remote LDAP servers and an administrator group. First, you configure the LDAP server(s) by specifying the server name, IP, and other details such as the Common Name Identifier and Distinguished Name. Then, you add the LDAP server to a user group. Finally, you create an administrator account that uses this user group for authentication, allowing any user from the specified LDAP group to authenticate.References:FortiAnalyzer 7.2 Administrator Guide, "Configuring remote authentication for administrators using LDAP" section.
NEW QUESTION # 17
Which statement is true about using aggregation mode on FortiAnalyzer?
- A. In aggregation mode, logs and content files are forwarded in real time.
- B. Aggregation mode supports log filters.
- C. Aggregation mode can work with syslog servers.
- D. Aggregation mode can be configured only on the CLI.
Answer: C
Explanation:
In aggregation mode, FortiAnalyzer stores logs received from devices and forwards them at a specified time each day to avoid duplication. It is specifically designed to work between two FortiAnalyzer units and does not support syslog or CEF servers. Additionally, aggregation mode configurations are limited to CLI commandslog-forwardandlog-forward-service.References:FortiAnalyzer 7.2 Administrator Guide,
"Aggregation" and "CLI Commands for Aggregation Mode" sections.
NEW QUESTION # 18
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)
- A. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- B. Log Data Sync provides real-time log synchronization to all backup devices.
- C. By default. Log Data Sync is disabled on all backup devices.
- D. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
Answer: B,D
Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.
NEW QUESTION # 19
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A.
- B.
- C.
Answer: C
Explanation:
The exhibit shows a packet capture with a syslog message containing a log event from a FortiGate device. This log event includes several details such as the date, time, and event message. The corresponding image that matches this packet capture would be the one which shows that the FortiGate device has logs being received in real-time, as indicated by the highlighted section in the packet capture where it mentions "real-time".
Therefore, Option A is the correct answer because it shows logs with "Real Time" status for the FortiGate-VM64 device, indicating that this FortiAnalyzer is currently receiving real-time logs from the device, matching the activity in the packet capture.References:Based on the provided exhibits and the real-time logging information, correlated with the knowledge from the FortiAnalyzer 7.2 Administrator documentation regarding log reception and device management.
NEW QUESTION # 20
Refer to the exhibit.
Based on the partial outputs displayed in the exhibit, which devices are ready to be configured as peers in an HA cluster?
- A. FortiAnalyzer1 and FortiAnalyzer3
- B. FortiAnalyzer2 and FortiAnalyzer3
- C. FortiAnalyzer1 and FortiAnalyzer2
- D. These devices cannot participate in the same cluster.
Answer: D
Explanation:
Based on the provided exhibit, which shows partial outputs of the system status and global settings for FortiAnalyzer devices, the devices cannot be configured as peers in an HA (High Availability) cluster. This is indicated by the HA Mode status being set to 'Stand Alone' for the displayed FortiAnalyzer device. For devices to be part of an HA cluster, they would need to havecompatible HA configurations, and usually, they should not be in 'Stand Alone' mode. Additionally, the exhibit only shows information for one FortiAnalyzer, so it cannot be determined if there is another device ready to form an HA cluster with it.
NEW QUESTION # 21
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. fortinet is assigned Restricted_User administrative profile.
- B. A trusted host is configured.
- C. ADOM mode is configured with Advanced mode.
- D. fortinet is assigned the Standard_User administrative profile.
Answer: D
Explanation:
If the administrator "fortinet" can view logs and perform device management tasks but cannot create a mail server for alert emails, it is likely due to the administrative profile assigned to them. The Standard_User administrative profile may restrict certain administrative functions, such as creating mail servers. To perform all administrative tasks, including creating mail servers, a higher privilege profile, such as Super_Admin, might be required.References:FortiAnalyzer 7.2 Administrator Guide, "Mail Server" section.
NEW QUESTION # 22
Which feature can you configure to add redundancy to FortiAnalyzer?
- A. IPv6 administrative access
- B. VLAN interfaces
- C. Primary and secondary DNS
- D. Link aggregation
Answer: D
Explanation:
Link aggregation is a method used to combine multiple network connections in parallel to increase throughput and provide redundancy in case one of the links fail. This feature is used in network appliances, including FortiAnalyzer, to add redundancy to the network connections, ensuring that there is a backup path for traffic if the primary path becomes unavailable.References:The FortiAnalyzer 7.4.1 Administration Guide explains the concept of link aggregation and its relevance to
NEW QUESTION # 23
An administrator has configured the following settings:
What is the purpose of executing these commands?
- A. To encrypt log transfer between FortiAnalyzer and other devices.
- B. To record the hash value and authentication code of log files.
- C. To verify the integrity of the log files received.
- D. To create the secure channel used by the OFTP process.
Answer: C
Explanation:
The purpose of executing the provided CLI commands, which include setting thelog-checksumtomd5-auth, is to ensure the integrity of the log files. This setting is used to record the MD5 hash value of log files, which is a widely used cryptographic hash function that produces a 128-bit (16-byte) hash value. By using MD5 authentication, FortiAnalyzer ensures that the log files have not been altered or tampered with during transit, thereby verifying their integrity upon receipt.This is not related to encrypting log transfers, scheduling reports, or creating secure channels for OFTP (Over-the-FortiGate Protocol) processes.
NEW QUESTION # 24
Which statement is true about the communication between FortiGate high availability (HA) clusters and FortiAnalyzer?
- A. Only the primary device in the cluster communicates with FortiAnalyzer.
- B. FortiAnalyzer distinguishes each cluster member by its MAC address.
- C. Each cluster member sends its logs directly to FortiAnalyzer.
- D. You must add the device lo the cluster first, and thenregistersthe cluster with FortiAnalyzer.
Answer: A
Explanation:
In a FortiGate high availability (HA) cluster, only the primary device sends its logs to the FortiAnalyzer. This is to ensure that logs are not duplicated between the primary and secondary devices in the cluster. The configuration of the FortiAnalyzer server on the FortiGate is such that the HA primary device is set as the server that forwards the logs.References:FortiAnalyzer 7.4.1 Administration Guide, sections mentioning HA cluster configuration and log forwarding.
NEW QUESTION # 25
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Run execute format disk to format and restart the FortiAnalyzer device.
- B. Shul down FortiAnalyzer and replace the disk.
- C. There is no need to do anything because the disk will self-recover.
- D. Perform a hot swap of the disk.
Answer: D
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 26
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?
- A. System Settings
- B. Log View
- C. FortiView
- D. Fabric View
Answer: C
Explanation:
To monitor the activities performed by any administrator, including a rogue one, on the FortiAnalyzer, you should use the FortiView feature. FortiView provides a comprehensive overview of the activities and events happening within the FortiAnalyzer environment, including administrator actions, making it the appropriate tool for tracking unauthorized or suspicious activities.References:FortiAnalyzer 7.4.1 Administration Guide,
"System Settings > Fabric Management" section.
NEW QUESTION # 27
......
Sample Questions of NSE6_FAZ-7.2 Dumps With 100% Exam Passing Guarantee: https://www.passexamdumps.com/NSE6_FAZ-7.2-valid-exam-dumps.html
Correct Practice Tests of NSE6_FAZ-7.2 Dumps with Practice Exam: https://drive.google.com/open?id=12Ny3J851Li0qXXX9nXEz5umC8zdUMhTx
