Verified FBAP_002 Dumps Q&As - FBAP_002 Test Engine with Correct Answers
Pass Your FBAP_002 Dumps as PDF Updated on 2023 With 75 Questions
NEW QUESTION # 45 
An architect need to create capacity sizing of FlashBlade to move data from a 6-year old EMC-Dell Isilon. The current Isilon solution consumes almost 1.3PB. There are three workloads:
-Warehouse application (40 TB, estimated compression ratio 2:1, IO size 8K)
-Images (20 TB, estimated compression ratio 1.0:1 average image size 1M)
-Log files (40 TB, estimated compression ratio 4:1, average file size 4k) What is the required FlashBlade configuration?
- A. 42x52TB blades
- B. 15x52TB blades
- C. 15x17TB blades
- D. 7x17TB blades ***
Answer: D
NEW QUESTION # 46
The customer has legacy production application that uses a hard-coded S3 access key with an encrypted hash for the secret key. The customer wants to enable development access to the production S3 bucket using the same S3 user account with a 60-day key rotation.
What should the architect do?
- A. Create an additional access key
- B. Use NFS to access data of S3 buckets.
- C. Create an additional S3 account and key ***
- D. Create an Active Directory service account.
Answer: C
NEW QUESTION # 47
A customer is implementing a new backup system using four backup appliances, with dual 10Gbps NICs writing to a FlashBlade. Each backup appliance can write at line speed.
What is the minimum number of 52TB blades to be able to handle this workload?
- A. 27 blades
- B. 35 blades
- C. 8 blades ***
- D. 15 blades
Answer: C
NEW QUESTION # 48
A customer has an application that needs to prioritize speed for untrusted applications to put large numbers of files on an NFS export. Which NFS Export options should be used?
- A. *(rw, sync, root_squash) ***
- B. *(ro, async, root_squash)
- C. *(ro, sync, no_root_squash)
- D. *(rw, async, root_squash)
Answer: A
NEW QUESTION # 49 
What are Port 31/32 on the XFMs reserved for?
- A. FlashBlade Chassis
- B. Customer Network
- C. Console
- D. Switch interconnectivity ***
Answer: D
NEW QUESTION # 50
A customer has two workflows. One workflow can use either SMB 3.0 or ISCSI. The other only leverage NFS.
What should the architect recommend as a strategy?
- A. Use FlashBlade for both environments
- B. Use block storage for ISCSI and FlashBlade for NFS. ***
- C. Use block storage for both environments
- D. Use block storage for NFS and FlashBlade for ISCSI
Answer: B
NEW QUESTION # 51
The development teams at a company are shifting to a CI/CD model of development using containers and Kubernetes for orchestration.
Which Pure technology should they use?
- A. REST API
- B. GUI
- C. CLI
- D. PSO ***
Answer: D
NEW QUESTION # 52 
The customer reports that the end clients shown in the diagram are NOT completing jobs on time. Each client writes 300MB/s to the FlashBlade for 45 minutes every hour, and they run concurrently. What does the architect need to do?
- A. Add additional mount point on each client.
- B. Increase bandwidth between Switch A and the Router.
- C. Stagger the job start times between the clients. ***
- D. Increase the number of DataVIPs available to the clients.
Answer: C
NEW QUESTION # 53 
A customer decides to use S3 as a protocol between the Backup Server to FlashBlade. The Backup Application S3 client in multi-threaded. What is the expected maximum restore throughput?
- A. ~20Gb/s
- B. ~80Gb/s ***
- C. ~70Gb/s
- D. ~10Gb/s
Answer: B
NEW QUESTION # 54
A customer application requires 4.2GB/s of sustained write performance. What is the minimum number of blades to meet the performance requirement?
- A. 7 blades ***
- B. 16 blades
- C. 14 blades
- D. 11 blades
Answer: C
NEW QUESTION # 55
A current FlashBlade customer has a chip design process that is not meeting their SLAs. Although the customer is using fast remove, the IOPS on their 7x17TB FlashBlade have plateaued around 700K IOPS.
What should the architect recommend adding?
- A. Subnets
- B. Blades ***
- C. VIPs
- D. LAG
Answer: B
NEW QUESTION # 56
A high-profile trading company requires latency to be sub-millisecond for their trading algorithms to work properly. They are currently using Direct Attached Storage devices, which is cumbersome to administer. The company needs a network storage solution for which to run the application and store market data.
Why should the company use SAN as the solution?
- A. Their network infrastructure is likely already built for SAN.
- B. The company needs a SAN to comply with rules and regulations.
- C. SAN has lower administrative overhead.
- D. A SAN can achieve the required latencies. ***
Answer: D
NEW QUESTION # 57
How many rack units does a FlashBlade system with 39 blades consume?
- A. 0
- B. 1
- C. 14 ***
- D. 2
Answer: C
NEW QUESTION # 58
What happens when a blade is added to an existing 7x17TB FlashBlade system?
- A. The system notifies support via Pure1 and waits for blade acknowledgement.
- B. The system gains ~1GB of write performance and ~15TB of capacity.
- C. The system gains additional fault tolerance and increases the reserve capacity.
- D. The system gains ~1GB of read performance and ~15TB of capacity.***
Answer: D
NEW QUESTION # 59
A customer wants to use FlashBlade as storage for a business critical, high-traffic SQL server. Why will this architecture fail?
- A. The customer will NOT have the knowledge to run a SQL server on NAS. Lmao
- B. The FlashBlade will share the database onto different blades. ***
- C. The FlashBlade will be unable to scale large enough for a big SQL DB.
- D. The inherent latency of NAS will disrupt the SQL server operations.
Answer: B
NEW QUESTION # 60
A customer need to analyze the performance data outside of Pure1 and Purity//FB.
Which two tasks should the customer perform? (Select two.)
- A. Export VM Analytics to csv
- B. Configure SNMP to send traps to destination under Messages/SNMP.
- C. Set up scheduled job to send csv analytics to mail recipient. ***
- D. Export csv from Pure1 ***
- E. Use REST API to pull data from Pure1
Answer: C,D
NEW QUESTION # 61
A customer has a 7x52TB system and reports poor workload performance.
The customer provides the following information:
1.The customer has 4 host connecting using NFS.
2.The environment is running VMware with 300 VMs.
3.The FlashBlade is connected to the customer network using 4x40Gb/s links What is causing this issue?
- A. The environment does NOT have properly configured jumbo frames.
- B. The customer must buy more blade to improve performance. ***
- C. The environment does NOT have enough concurrency to the FlashBlade.
- D. The customer must configure and optimal I/O size for the file system.
Answer: B
NEW QUESTION # 62
A FlashBlade is designed with a properly implemented single 4x40Gb/s LAG.
During implementation, the architect is informed that the ISL on the uplink switches in broken. The customer has no budget to repair or replace it. What should the architect do?
- A. Remove all uplink from FM2.
- B. Using the same LAG, create a second subnet and VIP.
- C. Change out the 40Gb/s cable for breakout cable.
- D. Divide the single LAG into one LAG per switch. ***
Answer: D
NEW QUESTION # 63
A company has a datacenter with a lot of electromagnetic interference. Their switches are 9m away from the FlashBlade and do NOT support speed faster than 10Gb/s.
Which cable should the architect use?
- A. Active Twinax cable.
- B. Fiber optic cable.
- C. Passive Twinax cable.
- D. Shielded ethernet cable. ***
Answer: D
NEW QUESTION # 64
A customer wants to deploy AI/ML using Pure Storage AIRI reference architecture.
Which model should the architect use to meet the requirements?
- A. An architecture that is made up of 4xDGX-1 servers, FlashBlade XFM, and FlashBlade single chassis.
- B. An architecture that is made up of 4xDGX-1 servers, 2xArista 7060x switches, and FlashArray //X70
- C. An architecture that is made up of 4xDGX-1 servers, 2xArista 7060x switches, and FlashBlade single chassis ***
- D. An architecture that is made up of 4xUCS X220 servers, 2xCisco Nexus 9000 switches, and FlashBlade single chassis
Answer: C
NEW QUESTION # 65 
An NFS-only environment is designed from the environment diagram shown. During a Proof-of-Concept installation, the customer decides to add 2 clients writing 300MB/s and 1 client reading 1GBs. What does the architect need to do?
- A. Add 1 blade ***
- B. Enable QoS on the network
- C. Create a second data VIP
- D. Add 2 more 1Gb/s links to the FlashBlade
Answer: A
NEW QUESTION # 66
How many rack units (Rus) of space are required to support a multi-chassis FlashBlade with 40 blades?
- A. 14 Rus ***
- B. 9 Rus
- C. 12 Rus
- D. 18 Rus
Answer: A
NEW QUESTION # 67
......
The Pure Storage FlashBlade Certified Architect Professional (FBAP_002) exam is a rigorous certification program designed to test an individual's ability to design and implement effective storage infrastructure that is tailored to meet the complex demands of modern businesses. This certification helps ensure that certified professionals possess the skills and knowledge necessary to tailor FlashBlade architecture solutions to meet the needs of a variety of different businesses, and can implement these solutions effectively. By earning this certification, professionals can position themselves as valuable assets, capable of delivering exceptional value to their organization through their unique skills and expertise.
Pass Pure Storage FBAP_002 Exam Info and Free Practice Test: https://www.passexamdumps.com/FBAP_002-valid-exam-dumps.html
Pure Storage FBAP_002 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1tVNO2nhtBPfnlAxlwYTnap7t6EWYSypd
