VCS-285 exam questions for practice in 2023 Updated 235 Questions
Updated Sep-2023 Premium VCS-285 Exam Engine pdf - Download Free Updated 235 Questions
NEW QUESTION # 18
What does an administrator need to enable Smart Meter?
- A. a json file
- B. an xml file
- C. a text file with the NetBackup key
- D. the Java plugin
Answer: A
NEW QUESTION # 19
What is the primary purpose of implementing load balancing media servers with NetBackup appliances?
- A. to offload the deduplication processing and reduce the network impact on the appliance
- B. to distribute the deduplication storage and increase the overall capacity of the MSDP pool
- C. to distribute the deduplication processing and increase the rehydration performance when restoring data
- D. to offload the deduplication processing and reduce the CPU and RAM requirement on the appliance
Answer: B
NEW QUESTION # 20
What is the role of NetBackup storage units in a backup environment?
- A. To define where backup data is stored, whether on disk or tape.
- B. To manage backup schedules and policies.
- C. To monitor backup jobs and send alerts for failed backups.
- D. To provide a catalog of backed up data for easy restoration.
Answer: A
Explanation:
Explanation
(Explanation: NetBackup storage units define the physical locations where backup data is stored, whether on disk or tape, and enable efficient storage utilization for backup data.)
NEW QUESTION # 21
A NetBackup appliance is not able to create a new backup file. What steps can be taken to troubleshoot the problem?
- A. Check the appliance's logs for errors.
- B. Contact Veritas Support for assistance.
- C. Check the appliance's storage devices.
Answer: A
NEW QUESTION # 22
An administrator is attempting to protect 500TB of Windows file system data in a 4-hour backup window, when the file servers are idle. The daily change rate for the data is below 1%, and an Initial full backup has been performed to a high performance disk array configured as an Advanced Disk storage unit.
What can the administrator do to ensure subsequent backups complete within the backup window?
- A. configure Synthetic backups
- B. configure NetBackup Accelerator
- C. configure client-side deduplication
- D. configure multiplexing
Answer: A
NEW QUESTION # 23
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?
- A. verify both media servers are set up in the master server host properties in the "Restore Failover" section
- B. set "Enable unrestricted media sharing for all media servers" in the master server host properties in the Media section
- C. from the master server, run bpimage to change the host name of the media server from mediaA to mediaB
- D. in the BAR console, change the "Server to use for backup and restores" setting to mediaB
Answer: A
NEW QUESTION # 24
What is the name of the feature that allows NetBackup to deduplicate data across multiple domains or sites using optimized duplication?
- A. Storage Lifecycle Policies (SLP)
- B. Auto Image Replication (AIR)
- C. Universal Shares (US)
- D. Cloud Catalyst (CC)
Answer: B
NEW QUESTION # 25
Which of the following is NOT a way to interact with NetBackup on appliances?
- A. Appliance Management Server (AMS)
- B. Appliance Shell Menu (CLISH)
- C. Appliance API
- D. Appliance Web Console
Answer: C
NEW QUESTION # 26
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
- A. Failover
- B. Media Server Load Balancing
- C. Round Robin
- D. Prioritized
Answer: C
NEW QUESTION # 27
How do you create a new disk pool in NetBackup?
- A. From the NetBackup Cloud Administrator's Guide, configure a new cloud storage pool and convert it to a disk pool
- B. From the NetBackup Administration Console, navigate to the Devices > Disk Pools tab and click New
- C. From the NetBackup AdvancedDisk Storage Solutions Guide, run the nbdevconfig command with the
-createpool option - D. From the NetBackup Web UI, navigate to the Storage > Disk Pools tab and click Add
Answer: D
Explanation:
Explanation
(Explanation: To create a new disk pool in NetBackup, you can use the NetBackup Web UI by navigating to the Storage > Disk Pools tab and clicking Add, where you can specify the disk pool name, storage unit group, and other disk pool parameters.)
NEW QUESTION # 28
Which guide should be consulted to learn about the function and configuration of cloud storage in NetBackup?
- A. Veritas NetBackup AdvancedDisk Storage Solutions Guide
- B. Veritas NetBackup Deduplication Guide
- C. Veritas NetBackup Status Codes Reference Guide
- D. NetBackup Web UI Cloud Administrator's Guide
Answer: D
NEW QUESTION # 29
Refer to the Exhibit.
An administrator is trying to access client properties on the NetBackup Administration Console and receives the following message:
When checking the services on the master server, the administrator sees that the PBX service is down.
Which two commands can the administrator use to increase the PBX log level to determine the reason for the message above? (Choose two.)
- A. vxpbx_exchanged
- B. pbxcfg
- C. pbx_exchange
- D. vxlogcfg
- E. vxlogmgr
Answer: D,E
NEW QUESTION # 30
Which of the following is NOT a way to obtain NetBackup Appliance updates and EEBs?
- A. Appliance Management Server (AMS)
- B. Veritas Support website
- C. Appliance Web Console
- D. Appliance Shell Menu (CLISH)
Answer: D
NEW QUESTION # 31
What is the difference between a disk pool and a storage unit in NetBackup?
- A. A disk pool is a physical device that stores backup data, while a storage unit is a logical grouping of disk volumes.
- B. A disk pool is a logical grouping of disk volumes, while a storage unit is a logical entity that references one or more disk pools.
- C. A disk pool is a logical grouping of disk volumes, while a storage unit is a physical device that stores backup data.
- D. A disk pool is a logical entity that references one or more storage units, while a storage unit is a logical grouping of disk volumes.
Answer: B
NEW QUESTION # 32
What is the name of the feature that lets you use a smart card or a digital certificate for single sign-on (SSO) in NetBackup?
- A. Kerberos authentication
- B. SAML authentication
- C. PKI authentication
- D. LDAP authentication
Answer: B
NEW QUESTION # 33
What is the role of storage unit groups in NetBackup?
- A. To manage the retention period and lifecycle of backup data
- B. To define the physical location of the storage units in the backup environment
- C. To specify the backup schedule for storage units
- D. To provide load balancing and failover for backup jobs
Answer: D
Explanation:
Explanation
(Explanation: Storage unit groups in NetBackup enable load balancing and failover for backup jobs, by allowing you to define multiple storage units for a backup policy and specify the order in which they are used for backups.)
NEW QUESTION # 34
What is the name of the feature that lets you detect and alert on abnormal backup activity in NetBackup?
- A. Anomaly Detection
- B. Backup Monitor
- C. Backup Analytics
- D. Backup Audit
Answer: A
NEW QUESTION # 35
What are the two levels of load balancing that can occur with AdvancedDisk storage in NetBackup?
- A. Storage units and disk pools
- B. Disk volumes and backup jobs
- C. Storage servers and storage units
- D. Disk pools and disk volumes
Answer: A
NEW QUESTION # 36
What is the minimum supported version of NetBackup for upgrading to NetBackup 10.0?
- A. 8.1.2
- B. 7.7.3
- C. 8.0
- D. 8.2
Answer: D
NEW QUESTION # 37
......
Authentic VCS-285 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.passexamdumps.com/VCS-285-valid-exam-dumps.html
Veritas VCS-285 Real Exam Questions Guaranteed Updated Dump from PassExamDumps: https://drive.google.com/open?id=1ce1ps2Qp6YQRkZfMzmbK9VJpZzQl4p2j
