Tested Material Used To E-S4HCON2022 Test Engine Exam Questions in here [Oct-2021]
Penetration testers simulate E-S4HCON2022 exam PDF
NEW QUESTION 18
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of user DDIC in the development client of the development system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: D
NEW QUESTION 19
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The major SUM Guide
- B. The SAP S/HANA Conversion Guide
- C. The DMO Guide
- D. The Application Guide
Answer: B,C
NEW QUESTION 20
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:
- A. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
- B. After the SUM roadmap step "Postprocessing" and post procedure steps are finished
- C. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
- D. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
Answer: A
NEW QUESTION 21
Which steps should be performed during the adjustment of dictionary objects (SPDD) in the development system, before SUM continues?
There are 2 correct answers to this question.
Response:
- A. Release the transport request containing the modification adjustment
- B. Manually activate the adjusted dictionary objects
- C. Assign the transport request as a modification adjustment transport
- D. Create "modified* versions of the objects that you need to adjust
Answer: C,D
NEW QUESTION 22
You want to perform an SAP S/4HANA conversion using SUM with DMO. Which steps run before the beginning of the technical downtime, independent of your SUM configuration?
There are 3 correct answers to this question.
Response:
- A. Import of dictionary objects from the download directory in phase DDIC_UPG
- B. Activation of dictionary objects in phase ACT_UPG
- C. Import of upgrade and language data from the download directory in phase TABIM UPG
- D. Generation of the new ABAP loads in phase RUN_SGEN_GENER8
- E. Creation of application tables in the SAP HANA database in phase EU_CLONE_MIG_DT_CREATE
Answer: A,B,C
NEW QUESTION 23
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?
- A. The corrections to the SUM Guide
- B. The link to different patch levels to SUM
- C. AA
- D. An overview about possible upgrade paths
Answer: A,B,D
NEW QUESTION 24
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. SAT (Runtime Analysis)
- B. SYCM (Simplification Database Content)
- C. SE80 (Object Navigator)
- D. ATC (ABAP Test Cockpit)
Answer: C,D
NEW QUESTION 25
You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
There are 2 correct answers to this question.
- A. Kernel for target release, Linux, SAP HANA
- B. Kernel for target release, Windows, SAP HANA
- C. Kernel for target release, Windows, SAP MaxDB
- D. Kernel for source release, Windows, SAP MaxDB
Answer: B,D
NEW QUESTION 26
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:
- A. Keep archiving on during the whole procedure.
- B. Reuse a profile for the shadow instance from a previous run.
- C. Use the Near Zero Downtime Maintenance Technology (NZDM).
- D. Choose the instance number of the shadow instance.
Answer: B,D
NEW QUESTION 27
What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:
- A. It is a database-specific document
- B. It contains a section "free space requirements"
- C. It is target release specific
- D. It contains a troubleshooting section
Answer: B,C
NEW QUESTION 28
You want to use the downtime-optimized data conversion for your SAP S/4HANA conversion. What is the main difference from a standard SAP S/4HANA conversion?
Please choose the correct answer.
Response:
- A. The repository is migrated in uptime
- B. Dedicated application tables are migrated in uptime
- C. TABIMJJPG is executed in uptime
- D. An additional temporary database is used during uptime
Answer: B
NEW QUESTION 29
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are kept as In the start release
- B. SUM continues with the next phase and your modifications are lost
- C. Before continuing with the next phase SUM asks for a modification adjustment transport
- D. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
Answer: A
NEW QUESTION 30
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime.
The server provides 8 CPU cores. Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center you can see 40 Process Buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
Please choose the correct answer.
Response:
- A. SUM is still running in uptime; the number of 40 defined R31oad processes is considered.
- B. These are 40 pairs of R3load processes, so there are 80 R3load processes running.
- C. The number of CPU cores does not allow more than 40 R31oad processes to be run in parallel.
- D. There is a maximum of 40 parallel R31oad processes within this specific downtime phase.
Answer: B
NEW QUESTION 31
You are planning an SAP S/4HANA conversion. Which conversion-specific tasks need to be performed during the preparation phase?
There are 2 correct answers to this question.
Response:
- A. Check the compatibility of custom code with SAP S/4HANA
- B. Apply the recommendations of the simplification list
- C. Run the database migration to the SAP HANA database
- D. Perform the migration of data into the new data structure
Answer: A,B
NEW QUESTION 32
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:
- A. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
- B. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.
- C. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.
- D. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
Answer: B
NEW QUESTION 33
What can you achieve by setting the SUM parameter "migration_only" to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:
- A. An SAP S/4HANA conversion is performed, without adapting the customer data.
- B. An upgrade of the software components is performed, without changing the database type.
- C. A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.
- D. A change of the database type is performed, without changing the software components.
Answer: D
NEW QUESTION 34
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support Packages that will be bound to the upgrade
- B. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
- C. The SAP Support Packages contained in the upgrade media
- D. The SAP Support Packages found in the download directory
Answer: D
NEW QUESTION 35
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Creation of the table structures in the new SAP HANA database
- B. Execution of eCATTs for business validation tests
- C. Execution of SPAU modification adjustment
- D. Execution of SPDD modification adjustment
- E. Execution of XPRAs and AIMs
Answer: B,C,E
NEW QUESTION 36
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It does NOT perform any table comparison.
- B. It performs a comparison on selected tables using check sum.
- C. It performs a comparison of all tables using check sum.
- D. It performs a comparison on all tables using row counts.
Answer: D
NEW QUESTION 37
What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?
- A. The repetition option allows you to repeat the complete migration
- B. The benchmaking option allows you to migration a specified set of tables
- C. The benchmaking option allows you to repeat the uptime migration
- D. The repetition option allows you to run the migration without a shadow system
Answer: B
NEW QUESTION 38
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correct answers to this question.
Response:
- A. Check the log files written under "SUM\abap\log"
- B. Check the dump size of the database export on disk
- C. Check logs for jobs starting with "RSUPG_SGEN" in the system
- D. Check the "Charts Control Center" in the SUM UI
Answer: A,D
NEW QUESTION 39
......
Authentic Best resources for E-S4HCON2022 Online Practice Exam: https://www.passexamdumps.com/E-S4HCON2022-valid-exam-dumps.html
Get the superior quality E-S4HCON2022 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1EqWy5AQUGY0coWmsqx3Nj5fr4G5b0QVE
