Pass ASQ CRE Exam With Practice Test Questions Dumps Bundle
2022 Valid CRE test answers & ASQ Exam PDF
NEW QUESTION 84
Which of the following is NOT a major consideration in performing a human factors analysis?
Response:
- A. Ergonomic evaluation.
- B. Latent path analysis.
- C. Hazard analysis.
- D. Conventional user expectations.
Answer: B
NEW QUESTION 85
The main purpose of environmental stress screening is which of the following?
Response:
- A. To subject parts to extremes
- B. To assist in the selection of standardized parts.
- C. To eliminate supplier inspections.
- D. To eliminate infant mortality failures.
Answer: D
NEW QUESTION 86
The general public is willing to accept some risks in their work environment. A study has indicated that an accident fatality at which of the following levels is NOT of great concern to the average person?
Response:
- A. 1 per 100,000 per persons per year.
- B. 1 per 1000 per persons per year.
- C. 1 per 10,000 per persons per year.
- D. 1 per 100 per persons per year.
Answer: A
NEW QUESTION 87
Develop the fault tree analysis for a candy dispensing machine. There are two contributing subsystems, both of them must fail for the system to fail. The electronic release has Pf = 0.04 and the coil spring release has Pf = 0.06. What is the system's probability of failure?
Response:
- A. 0.0124
- B. 0.0098
- C. 0.0100
- D. 0.0024
Answer: D
NEW QUESTION 88
The prediction technique has obviously not always been effective quantitatively. There is often a wide difference between actual reliability and predicted reliability. Nevertheless, the reliability prediction technique permits:
Response:
- A. Indicating which department is to blame.
- B. Separating out "the vital few" from the "trivial many".
- C. Estimating how good the product really is.
- D. Spotlighting what has gone wrong with the program.
Answer: B
NEW QUESTION 89
An undesired event in a system led to the below fault tree. Which of the following are the cut sets of the fault tree?
Response:
- A. {A, B1} {A, B2}
- B. {A}, {A, B1}
- C. {A}, {B1, B2}
- D. {A, B1}, {B2}
Answer: A
NEW QUESTION 90
Reliability can be specified in terms of all of the following EXCEPT:
Response:
- A. Stress to failure.
- B. Cost of failure
- C. Cycles to failure.
- D. Time to failure.
Answer: B
NEW QUESTION 91
A key distinction between Taguchi designed experiments and classical designed experiments is that Taguchi designs Response:
- A. Are full-factorial and classical designs are not.
- B. Include 2-level factors and classical design do not.
- C. Are not orthogonal and classical designs are.
- D. Do not rely on randomization and classical experiments do.
Answer: D
NEW QUESTION 92
A failure reporting and corrective action system should ensure that all steps are taken to:
Response:
- A. Determine responsibilities for failures.
- B. Define the goals of the FRACAS team.
- C. Identify, investigate and analyze failures.
- D. Record costs associated with the corrective action.
Answer: C
NEW QUESTION 93
Which of the following is the key component in continuously providing a reliable product?
Response:
- A. Reduce product variability.
- B. Adequately train the work force.
- C. Scheduled equipment maintenance actions.
- D. Improve supplier acceptance testing.
Answer: A
NEW QUESTION 94
What type of failure is usually reduced by periodic overhaul and replacement of component parts?
Response:
- A. Catastrophic.
- B. Random.
- C. Wear out.
- D. Early life.
Answer: C
NEW QUESTION 95
Risk management includes which of the following?
I. Integration of risk evaluation in all design phases.
II. Knowledge and consideration of liability law.
III. Adopting procedures, policies and practices to control risks.
IV. Providing product labels and operator manuals where appropriate.
Response:
- A. II and IV only
- B. I, II and IV only
- C. I, II, III and IV
- D. I, II and III only
Answer: C
NEW QUESTION 96
The House of Quality incorporates a correlation matrix roof. This describes the relationships between which of the following?
Response:
- A. Hows [design features].
- B. Competitive comparisons.
- C. Whats [customer needs].
- D. Whats and hows.
Answer: A
NEW QUESTION 97
All of the following statements are TRUE about confidence interval EXCEPT Response:
- A. The width does not depend on the confidence level.
- B. The width indicate the uncertainty in estimates.
- C. A larger sample size would yield a smaller width
- D. A smaller sample size would yield a larger width
Answer: A
NEW QUESTION 98
A failure that leaves the system fully functional is:
Response:
- A. A nuisance failure.
- B. A minor failure.
- C. A chronic failure.
- D. A major failure.
Answer: B
NEW QUESTION 99
......
Top ASQ CRE Courses Online: https://www.passexamdumps.com/CRE-valid-exam-dumps.html
Free ASQ CRE Exam Questions and Answer from Training Expert PassExamDumps: https://drive.google.com/open?id=1-WFnPdYqDZ0m52wDKb1saqZUg0FpKE15
