Oracle 1z0-996-22 Test Engine Practice Test Questions, Exam Dumps
100% Free 1z0-996-22 Daily Practice Exam With 70 Questions
NEW QUESTION # 37
Which three are important Account concepts that must always be followed? (Choose three.)
- A. Bills are produced for an account and are sent to the account persons.
- B. Every Account has a unique, system-assigned Account ID.
- C. An Account can only reference one and only one person at one time.
- D. Accounts expire when there are no active contracts.
- E. An Account references one or more persons.
Answer: A,B,E
Explanation:
Based on the information available from Oracle Utilities Customer Cloud Service documentation, the three important account concepts that must always be followed are:
Every Account has a unique, system-assigned Account ID (Option C): This is a fundamental concept in Oracle Utilities Customer Cloud Service, ensuring that each account is uniquely identifiable and can be tracked and managed efficiently.
Bills are produced for an account and are sent to the account persons (Option D): This is a key operational concept in the utility services domain. The billing process is centralized around the account, and the bills generated are associated with the account, which in turn is linked to the person or persons responsible for it.
An Account references one or more persons (Option E): This concept is essential in the management of customer information, where an account can be linked to one or more persons, indicating who is responsible or associated with the account.
NEW QUESTION # 38
Your client has the following requirements:
Many customers are installing their own solar electrical generationequipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid.
Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create two service points: one for subtractive import and the other for consumptive export.
- B. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
- C. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
- D. Create two new measuringcomponent types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
Answer: D
Explanation:
According to the Oracle Utilities Customer Cloud Service User Guides, measuring component types define the most important properties of a measuring component, such as what it measures, how regularly it measures it, and whether it should be connected to a physical device1. Measuring component types also specify how the measuring component's final measurements should be stored, and whether they are subtractive or consumptive1. In this case, the client needs to measure both the energy imported and exported by the customers who have solar electrical generation equipment. Therefore, the solution is to create two new measuring component types, one for subtractive import and the other for consumptive export, and link them to the same scalar device that has separate registers for both readings. This way, the measuring components can store the measurements in kWh and apply the appropriate sign to indicate the direction of the energy flow2. References:
Understanding Measuring Component Types
Measuring Components
NEW QUESTION # 39
How many service agreements are linked to a severance process?
- A. one
- B. all service agreements that are connected to the initiating collection process
- C. zero - accounts are linked to severance processes
- D. any number defined by the business user
- E. all service agreements that are connected to the initiating overdue process
Answer: A
Explanation:
A severance process is a collection of events that are performed to persuade a customer to pay the outstanding debt or to disconnect the service if the debt is not paid1. A severance process is linked to one and only one service agreement (SA) that has an overdue balance2. A severance process can be initiated manually or automatically based on the collection process status of the SA3. A severance process can also be linked to a reconnection process that restores the service after the debt is paid or a payment arrangement is made. References:
1: Severance Process - Severance Events
2: Designing Your Severance Procedures
3: Setting Up Severance Procedures
4: Designing Your Reconnection Procedures
NEW QUESTION # 40
What can cause multiple bill lines for a rate component to be produced in a bill calculation header?
- A. change in Bill Factor
- B. changes in Rate Version Calculation Group and Bill Factor
- C. changes in Rate Schedule and Bill Factor
- D. change in Rate Schedule
- E. change in Rate Version Calculation Group
Answer: C
NEW QUESTION # 41
Which statement is true about specifications?
- A. Specifications include the inspection history of an asset.
- B. Specifications can include peer specifications.
- C. Specifications apply only to assets and not to components.
- D. A single specification can only be used on one asset.
Answer: B
Explanation:
Specifications are sets of attributes that define the physical and functional characteristics of an asset or a component. Specifications can be used to store information such as dimensions, weight, color, model, serial number, manufacturer, and so on. Specifications can also include peer specifications, which are specifications that are related to the same asset or component, but have different purposes or scopes. For example, an asset can have a specification for its installation details, and another specification for its maintenance requirements.
Peer specifications can be linked by using the peer specification type and the peer specification ID fields. The other options are not true because specifications do not include the inspection history of an asset, which is stored in the asset history business object. Specifications can apply to both assets and components, as long as they have the same specification type. A single specification can be used on multiple assets or components, as long as they have the same specification type and specification ID. References: Specifications, About Specifications, Peer Specifications
NEW QUESTION # 42
How many devices can be installed at a service point at an instance in time?
- A. up to three devices
- B. one for each measuring component
- C. one for each service type
- D. exactly one device
Answer: D
NEW QUESTION # 43
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Device Type and Measuring Component Type
- B. Usage Type
- C. Device Configuration Type
- D. Measuring Component Type
- E. Device Type
Answer: D
NEW QUESTION # 44
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Specifications
- B. Rules
- C. Conditions
- D. Attributes
Answer: A
NEW QUESTION # 45
Which three statements are correct for Adjustment Types? (Choose three.)
- A. They control how adjustments appear on bills.
- B. They control whether a rate is to be called to calculate an adjustment amount.
- C. They control the valid Adjustment Profiles that adjustment types can belong to.
- D. They can default an Adjustment Amount to adjustments.
- E. They control the valid Service Agreement Types that adjustments can be linked to.
Answer: A,B,E
NEW QUESTION # 46
When the source of a Financial Transaction is canceled, what does it result in?
- A. The source Financial Transaction status is changed to "Canceled".
- B. The source Financial Transaction is deleted.
- C. The source Financial Transaction is deleted and a new reversal Financial Transaction is created.
- D. A new reversal Financial Transaction is created.
- E. No change occurs.
Answer: D
Explanation:
When the source of a Financial Transaction is canceled, it results in a new reversal Financial Transaction being created. The reversal Financial Transaction has the same amount as the source Financial Transaction, but with the opposite sign. The reversal Financial Transaction also has the same source as the source Financial Transaction, but with a different status. The source Financial Transaction remains in the system, but its status is changed to "Canceled". The reversal Financial Transaction is used to reverse the financial impact of the source Financial Transaction on the account balance and other financial calculations. References: Oracle Utilities Customer Cloud Service Financial Transaction - Main, Oracle Utilities Customer Cloud Service Cancel Reasons, Oracle Utilities Customer Cloud Service Setting Up Payment Cancellation Reasons
NEW QUESTION # 47
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Issue
- B. Low
- C. Terminate
- D. Information
- E. Complete
Answer: A,B,D
Explanation:
Initial measurement data (IMD) exception categories are the groupings of exceptions for an IMD based on their functional similarity1. They provide a way to define VEE exceptions in a distinct enough way to understand the root issue that was generated from the VEE rule. The following are the three IMD exception categories that are available when you execute VEE rules:
Issue: This category indicates that there is a problem with the IMD that needs to be resolved before it can be used for further processing. For example, an IMD might have an issue exception if it has a missing or invalid identifier, a missing or invalid date/time, a missing or invalid UOM, or a missing or invalid status2.
Low: This category indicates that the IMD value is lower than expected based on the previous values or the configured thresholds. For example, an IMD might have a low exception if it has a negative consumption, a zero consumption, a low consumption, or a low demand2.
Information: This category indicates that the IMD value is valid but has some additional information that might be useful for analysis or reporting. For example, an IMD might have an information exception if it has a rollover, a reset, a leap year adjustment, or a daylight saving time adjustment2. References:
1: Understanding Exception Types
2: Configuring Exception Types
NEW QUESTION # 48
A Service Order Orchestrator determines the steps required to complete the service.
As an example, based on the state of the service point, what does the Enable Service Orchestrator determine the actions for?
- A. Create a Device Configuration; Install a Device; Turn on the Device
- B. Connect the Service Point; Install a Device; Turn on the Device
- C. Connect the Service Point; Install a Device; Create a Usage Subscription
- D. Create a Service Point; Install a Device; Turn on the Device
Answer: D
NEW QUESTION # 49
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device configuration links a device only to interval channels.
- C. Two measuring components on the same device should have the same Units of Measure (UOM).
- D. A device should have only one measuring component type.
Answer: A
NEW QUESTION # 50
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
- B. A device with a new configuration type is created.
- C. A new installation event is created to "install" (new device configuration).
- D. The original installation event is updated with the "removal" (expire old device configuration).
- E. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
Answer: A
NEW QUESTION # 51
When creating a new business object for a service point (SP), what items are required to be able toview and update the new elements associated with the SP?
- A. Maintenance Object, Application Service, and Schema
- B. Validation Algorithm, Post Processing Algorithm, and Lifecycle
- C. Display UI Map, Display Map Service Script, and Maintenance UI Map
- D. Schema, Validation Algorithm, and Maintenance UI Map
Answer: C
Explanation:
When creating a new business object for a service point in Oracle Utilities Customer Cloud Service, it is necessary to have certain elements in place to view and update the new elements associated with the service point. The correct option, "C. Display UI Map, Display Map Service Script, and Maintenance UI Map", encompasses the essential components for this process.
Display UI Map: The User Interface (UI) Map is crucial for defining how the data fields of the business object are displayed in the user interface. It is essentially a layout that dictates how information is presented and interacted with within the system.
Display Map Service Script: Service Scripts are used to handle the business logic associated with a business object. In the context of a Display Map, the Service Script would be responsible for managing how data is retrieved, manipulated, and presented in the UI, based on the definitions in the UI Map.
Maintenance UI Map: Similar to the Display UI Map, the Maintenance UI Map is focused on the aspects of editing or updating the business object. This UI Map would define how the user interface should be laid out for maintenance tasks, such as updating service point details or adding new information.
These components work together to ensure that when a new business object is introduced for a service point, it can be effectively displayed, maintained, and interacted with within the Oracle Utilities Customer Cloud Service system.
References:
Oracle documentation on Defining Business Objects: Defining Business Objects.
Oracle documentation on Useful Services and Business Services: Useful Services and Business Services.
Oracle documentation on Business Objects: Business Objects.
Oracle documentation on Granting Access To Business Objects: Granting Access To Business Objects.
NEW QUESTION # 52
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Issue
- B. Terminate
- C. Information
- D. Complete
- E. Low
Answer: A,B,C
NEW QUESTION # 53
When creating a new business object for a service point (SP), what items are required to be able to view and update the new elements associated with the SP?
- A. Display UI Map, Display Map Service Script, and Maintenance UI Map
- B. Validation Algorithm, Post Processing Algorithm, and Lifecycle
- C. Maintenance Object, Application Service, and Schema
- D. Schema, Validation Algorithm, and Maintenance UI Map
Answer: C
NEW QUESTION # 54
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Attributes
- B. Rules
- C. Specifications
- D. Conditions
Answer: A
Explanation:
Specifications are a way of defining the characteristics and behavior of assets or other entities in Oracle Utilities Customer Cloud Service. Specifications can include sets of procedures, and careful handling instructions for hazardous or delicate materials, as well as attributes that provide information about the entity.
Attributes are data elements that can be used to store and display values, such as dimensions, weight, color, model, serial number, and so on. Attributes can also be used to define relationships between entities, such as parent-child, sibling, or peer-to-peer. Attributes can be configured to have different data types, validations, default values, and display options. References: Specifications, Attributes, Oracle Utilities Customer Cloud Service - Get Started
NEW QUESTION # 55
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage - B. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage - D. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements
Answer: A
NEW QUESTION # 56
How many Tenders can a Payment Event have?
- A. one Tender for each account the payment is applied to
- B. one Tender for each form of Payment submitted
- C. no Tenders for Payment Events, only Payments
- D. no Tenders for Payment Events, only Payment Segments
- E. one Tender per Payment Event
Answer: B
NEW QUESTION # 57
......
Use Valid New 1z0-996-22 Test Notes & 1z0-996-22 Valid Exam Guide: https://www.passexamdumps.com/1z0-996-22-valid-exam-dumps.html
1z0-996-22 exam torrent Oracle study guide: https://drive.google.com/open?id=12w9JbmZUVQVjCDQ5euI9pXYfNj1WkYNI
