[Oct-2022] Download Real Huawei H35-211_V2.5 Exam Dumps Test Engine Exam Questions
New H35-211_V2.5 exam dumps Use Updated Huawei Exam
NEW QUESTION 20
The DBA scheduling of the GPON system is only for the upstream traffic, and the downstream traffic cannot
be scheduled.
- A. False
- B. True
Answer: B
NEW QUESTION 21
(Radio) When deploying GPON Type C single attribution protection, the following description is correct.
- A. When the olt uplink fails, a protection reversal can be triggered
- B. The service configuration of ONU access is completely identical to the configuration before protection
- C. Two ports protected by the OLT side cannot send and receive data at the same time
- D. The branch fiber breaks, and the state of the OLT's work port becomes standbY
Answer: C
NEW QUESTION 22
The total downstream bandwidth of the 10G EPON PONI port is the sum of the EPON downstream bandwidth
and the 10G EPON downstream bandwidth.
- A. False
- B. True
Answer: B
NEW QUESTION 23
(Single)When deploying home and guest services in a PON system, which of the following services has the
highest priority?
- A. GAME
- B. VOIP
- C. INTERNET
- D. IPTV
Answer: B
NEW QUESTION 24
The maximum spectroscopic ratio supported by 10G GPON is (Radio) ?
- A. 0
- B. 1:64
- C. 1
- D. 1:256
Answer: A
NEW QUESTION 25
(Single choice) The following statement about defense MAC Spoofing is wrong
- A. After the anti-MAC Spoofing function is enabled, the system automatically implements the dynamic
binding of the AC address to the service flow - B. After enabling the Anti-MAC Spoofing function, for IPoE users using fixed IP, the user needs to be
statically configured - C. Turning off the Anti-MAC Spoofing function can only take out the fixed table items, which does not
affect the user's service application, but the service forwarding surface will be interrupted. - D. MAC Anti- Mac Spoofing' features are mutually exclusive with WMAC, SC, PPPOE SMAC features at
the VLA level
Answer: C
NEW QUESTION 26
When ont fails or the hardware needs to be replaced, the ONT service needs to be replaced, and then the ONT
service needs to be removed on the OLT, and then the new ONT service needs to be registered
- A. wrong
- B. Right
Answer: A
NEW QUESTION 27
(Multi-select) Query ppPOE simu-lation results on the MDU side as follows
From the query results, it can be judged ()
- A. The service configuration of ppPoE users is normal
- B. The MDU management IP is configured correctly
- C. The link between MDU tone setting and BRAS is ok
- D. PPPoE user account and authentication method are correct
Answer: A,C,D
NEW QUESTION 28
The maximum spectroscopic ratio supported by 10G EPON is?
- A. 1:64
- B. 1:32
- C. 1: 256 (Laboratory).
- D. 1:128
Answer: C,D
NEW QUESTION 29
In Huawei's u2000 management system, when adding network elements, you can only add -- ones- when you
access the network element.
- A. wrong
- B. Right
Answer: A
NEW QUESTION 30
The Class D multicast address range is from 224. 0 0 0 to 238. 255 255 255
- A. True
- B. False
Answer: B
NEW QUESTION 31
The number of users under the OLT can also determine whether the VLA is single-layer or dual-layer VLA.
Single-layer VLANs can be used when the number of users is small, and dual-layer VLANs must be used
when the need to distinguish services and the number of users is second to ().
- A. 1K
- B. 4K
- C. CS
- D. 2K
Answer: B
NEW QUESTION 32
Under the H.248 protocol, if the signaling IP and media IP are both 10. 1 1 100/8, voice gateway is 10. 1 1 1.
When configuring voIP service, the following command is incorrect
- A. Using the command ip address media10 in voip mode. 1 1 10010 1 1 1 Configure the media IP
- B. Use the if-h248 attributei command to configure interface properties under the voice interface
- C. Using the command ip address signaling10 in voip mode. 1 1 10010 1 1 1 Configure the signaling IP
- D. Use the reset coldstart command under Voice Interface to make the interface property configuration take
effect
Answer: C
NEW QUESTION 33
(Multi-select) Use 0TDR to locate the abnormally attenuated location in the optical path, and after the OTDR
is connected to the detected line, which of the following parameters can be set.
- A. Sets the pulse width
- B. Set the measurement range
- C. Set the mode
- D. Set the wavelength
Answer: A,B,C,D
NEW QUESTION 34
The (radio) OLT is configured for V2 on the IGMP version when the OLT receives igmr v3 forwarded from
on-T What kind of treatment will be done after joining the message
- A. Send a specific group query message
- B. Send a universal group query message
- C. Normal forwarding
- D. Discard directly
Answer: D
NEW QUESTION 35
(Radio) 10G GPON system downlink wavelength is
- A. 1490nm
- B. 1577nm
- C. 1310nm
- D. 1270mm
Answer: B
NEW QUESTION 36
The ascending wavelength of the (radio) 10G EPONE is?
- A. 1490nm
- B. 1577nm
- C. 1310m (asymmetrical).
- D. 1270m (symmetrical).
Answer: C,D
NEW QUESTION 37
(Radio) When using the siP protocol, you need to use a local number graph for matching, if you use the default
matching mode to match a 7-digit number beginning with 7727, then the following options are available?
The figure is
- A. Local-bitmap add huawei normal 7727xxx/7726.
- B. Local-di gi tmap add huawei normal 7727
- C. Local-digi tmap add huawei normal 772. /7727xxx
- D. Local-digitmap add huawei normal 7727xxx/7727
Answer: D
NEW QUESTION 38
The (radio) prerequisites for esight to automatically discover OLT and MXU devices by IP address are not
included
- A. Esight and the device need to be on the same network segment, otherwise the device cannot be
discovered using the ARP broadcast protocol. - B. The SMMP parameters on the esight side have been configured and are aligned with the device side SP
parameters. - C. You already have the operation permission of "Resource Access".
- D. Esight and the device can be routed to communicate (ping each other).
Answer: A
NEW QUESTION 39
(Radio) The following is not the QOS service model, is
- A. Intserv
- B. Diffserv
- C. Best Effort
- D. FIFO service
Answer: B
NEW QUESTION 40
......
Pass Your H35-211_V2.5 Dumps as PDF Updated on 2022 With 66 Questions: https://www.passexamdumps.com/H35-211_V2.5-valid-exam-dumps.html
Verified H35-211_V2.5 Dumps Q&As - H35-211_V2.5 Test Engine with Correct Answers: https://drive.google.com/open?id=1fpJUEH_qRLtnCEHe3lg1tZxIRaIYGIj-
