NCSE-Core PDF Dumps | Jan 23, 2022 Recently Updated Questions
NCSE-Core Exam Questions – Valid NCSE-Core Dumps Pdf
NEW QUESTION 26
What is the main function of Oplog?
- A. A memory cache to coalesce all writes before destaging to the extent store
- B. A persistent write buffer to coalesce bursts of random writes before destaging to the extend store
- C. A persistent write buffer to coalesce all writes before destaging to the extent store
- D. A memory cache to coalesce bursts of random writes before destaging to the extent store
Answer: B
NEW QUESTION 27
An administrator needs to configure Acropolis File Service (AFS). The administrator is setting up AFS for the first time on the Nutanix cluster.
How many file services VMs are created by default?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 28
An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issue. The Windows VMs do not experience the same issue.
Which option should the administrator use to resolve this issue?
- A. Utilize Jumbo Frames
- B. Add additional disks to the Volume Group
- C. Utilize a separate subnet for the Linux VMs
- D. Set the SCSI timeout value to 60
Answer: D
NEW QUESTION 29
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment.
Why is this happening?
- A. Multi-protocol access is not configured.
- B. NFS default access is set to Read Only
- C. Access Based Enumeration is not enabled.
- D. The system is deployed as a single FSVM.
Answer: A
NEW QUESTION 30
Refer to the exhibit.
Assuming a prospect is currently using Thick Provisioned virtual disk, at a minimum, which two tabs should be evaluated in an RVTools report to determine required resources for sizing? (Choose two.)
- A. vDisk
- B. vCluster
- C. vPartition
- D. vInfo
- E. vNetwork
Answer: C,D
NEW QUESTION 31
How long must data be 'write-cold' before Erasure Coding can begin optimization?
- A. 6 hours
- B. 7 days
- C. 1 days
- D. 1 hours
Answer: B
NEW QUESTION 32
Refer to the exhibit.
Based on the Sizing scenario, what level of resiliency can be inferred about the configuration?
- A. RF3
- B. N+1
- C. N+0
- D. N+2
Answer: C
NEW QUESTION 33
An SE is building a solution for Federal government prospect that requires FIPS 140-2 Level 2 encryption for data at rest.
Which two items are required to deliver a solution that meets the encryption standard? (Choose two)
- A. Self-Encrypting Drives.
- B. Nutanix Prism Pro Licensing.
- C. A supported Key Management Server.
- D. Nutanix Acropolis Pro License.
- E. Nutanix Software encryption.
Answer: A,C
NEW QUESTION 34
A customers current AHV cluster for mixed server workloads consists of 7 NX-3060-G6 nodes with Intel Skylake processors spread across two blocks. Growing demand for resources requires the customer to order three additional NX-3060 G7 nodes with Intel Cascade Lake processors.
Which supported approach allows the customer the most efficient use of their additional resources?
- A. Expand the editing cluster by adding a new block populated with the three additional nodes
- B. Create a new cluster using a new block populated by the three additional nodes.
- C. Expand the cluster by fully populating the existing blocks with the three additional nodes.
- D. Expand the cluster by fully populating the existing blocks, and adding a new block populated with two nodes.
Answer: A
NEW QUESTION 35
A customer's database administrator is concerned about restoring data locality for their VMs after they migrate during an AHV upgrade.
which feature that addresses the issue should the systems engineer highlight?
- A. Mirroring the database on two VMs eliminates the need for data locality.
- B. Shadow clones mitigate the need for data locality.
- C. AHV's built-in scheduler automatically restores data locality.
- D. All VM data is moved from the source to the destination node with the VM
Answer: C
NEW QUESTION 36
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance windows. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose Two)
- A. Stop all Nutanix Files clusters
- B. Relocate the linked LDAP server
- C. Reconfigure IPMI for the new datacenter.
- D. Shut down all user VMs in the cluster
Answer: A,D
NEW QUESTION 37
A coustomer wants to decrease costs and increase efficency by eliminating NAS silos and adopting a cloud-like mindset.
Which Nutanix product meets these requirements?
- A. Nutanix Files
- B. Nutanix Beam
- C. Nutanix Xi Frame
- D. Nutanix Calm
Answer: A
NEW QUESTION 38
A prospective customer asks about failure handing. They have heard all HCI is the same and want to know what happens if 2 nodes fail within 1 hour of each other. if there is capacity in the cluster, how will this failure scenario be handled ?
- A. The Nutanix RAID array will leverage the hot spare.
- B. Nutanix begins rebuilds immediately on a failure.
- C. Every block of data is written to every node in a Nutanix cluster
- D. Nutanix waits 60 minutes to recover from failures; data loss may occur
Answer: B
NEW QUESTION 39
Refer to Exhibit.
A systems engineer is creating a configuration in Sizer for a customer that is building an app for use as an eBooks repository the app requires the following two workloads:
1. 50 generic web server VMs, each with 2 vCPUs on a 4:1 vCPU ratio, 8 GB of RAM, and 100GB of storage each
2. A fileserver workload with 80TB of usable storage available, which contains mostly PDF's and pre- compressed data.
Any reduction in performance of the web servers must be avoided. After entering the workload with default options, the Sizer outputs the configuration shown in the exhibit.
Which adjustment does the systems engineer need to make to the scenario to meet the performance requirements?
- A. Switch to manual and change the CPUs of the node configuration to a dual 10 core model
- B. increase the RAM of the web server workload to 10 GB per VM.
- C. increase the vCPU:CPU ratio of the Webserver workload to 6:1
- D. Switch to manual sizing and increase the RAM of the node configuration to 384 GB
Answer: D
NEW QUESTION 40
During an initial discussion. a prospective customer indicates they are strongly considering vSAN for their HCI initiative. The prospect's workloads are mostly read-intensive and they have over 1PB of archival data.
The prospect expects to save on costs using storage efficiencies that their existing platform does not support.
Which two Nutanix differentiators should the systems engineer discuss? (Choose two.)
- A. Data Locality
- B. CVM Autopathing
- C. Compression on Hybrid Nodes
- D. Volume Group Load Balancing
Answer: A,C
NEW QUESTION 41
A prospects need to refresh their environment but has a very small budget for the project. Four years after their last infrastructure refresh, the prospect's datacenter is only running at 40% utilization. In addition, they have
25 satellite offices. Each office has a requirement to run 4 to 6 VM's locally.
Which two Nutanix platform capabilities should the SE highlight to address the prospect's concerns? (Choose two)
- A. Pay as you grow.
- B. Automated data storage tiering.
- C. Multi-Site Management.
- D. Software only.
- E. Single node backup.
Answer: A,C
NEW QUESTION 42
A prospective customer uses both Oracle and Microsoft products for critical applications The prospect prefers an all flash array over HCI, because they have made a recent, significant investment in physical servers for their Oracle environment to save on licensing costs.
Which feature should be discussed to address this objection?
- A. VM Flash Mode
- B. Hyper-V support
- C. AHV
- D. Volumes
Answer: D
NEW QUESTION 43
In a competitive POC scenario, the prospect is testing Nutanix against VxRail and Hyperflex. The customer is interested in an ""All in One"" solution that's simple to deploy, manage, and grow.
Which two test plan items should the SE map to POC success criteria?
(Choose two)
- A. Deploy Calm to automate application deployment.
- B. Enable all data efficiency settings.
- C. Expand the cluster by adding an additional node.
- D. Use a single interface to manage and monitor the full stack.
- E. Deploy HCIbench to determine maximum IOPS.
Answer: C,D
NEW QUESTION 44
A customer recently deployed Nutanix for VDI workloads and determine AFS is suitable for their departmental shares. They ask about infrastructure requirements providing the following file workloads specifics:
* 11.8 TB of data.
* 360000 files.
* 2400 Users.
* 800 shares.
Based on the exhibit,
which criteria shared by customer supports the requirement of additional nodes?
- A. 360000 files.
- B. 800 shares.
- C. 11.8 TB of data.
- D. 2400 Users.
Answer: A
NEW QUESTION 45
Over what period of time does the Nutanix Collector provide performance data?
- A. Previous 24 hours
- B. Previous 7 days
- C. Point in time at collection
- D. User definable at collection
Answer: B
NEW QUESTION 46
A systems engineer is building a private cloud for internal developers that should include self-service and life cycle management for both kubernetes containers and SQL databases. which additional license feature must be purchased to provide this capability?
- A. Prism Pro
- B. Nutanix Beam
- C. Nutanix Era
- D. Nutanix Flow
Answer: A
NEW QUESTION 47
......
NCSE-Core dumps Sure Practice with 197 Questions: https://www.passexamdumps.com/NCSE-Core-valid-exam-dumps.html
NCSE-Core Practice Test Questions Answers Updated 197 Questions: https://drive.google.com/open?id=1LWB7UpiL2iHUtrtWAWJUx5gwVIDx8HF5
