[Jul-2023] HP HPE2-T37 DUMPS WITH REAL EXAM QUESTIONS
2023 New PassExamDumps HPE2-T37 PDF Recently Updated Questions
NEW QUESTION # 39
You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.
Answer:
Explanation:
NEW QUESTION # 40
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Volume provisioning will only work for arrays that ate accessible through these SANs.
- B. Volume presentation through server profile will work with the discovered state.
- C. Auto-zoning functionality will not work until SANs are associated with networks.
- D. Snapshot functionality will be limited only to the volumes not using these SANs.
Answer: B
NEW QUESTION # 41
For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.
Answer:
Explanation:
NEW QUESTION # 42
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION # 43
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- B. Changes to the server profile were implemented directly on the server profile.
- C. HPE OneView was restored from a backup that created ^consistency with the server profile template.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: A
NEW QUESTION # 44
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
- B. HPE Superdome Flex complex can be added by adding base chassis of this complex.
- C. A Rack Management Controller must be added to HPE OneView.
- D. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
Answer: C
NEW QUESTION # 45
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?
- A. A logical JBOD cannot be created during server profile creation and must be prepared in advance
- B. Different types of the drives can be used within a logical JBOD as long as they have the same capacity
- C. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
- D. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator
Answer: A
NEW QUESTION # 46
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- B. Changes to the server profile were implemented directly on the server profile.
- C. HPE OneView was restored from a backup that created inconsistency with the server profile template.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: B
NEW QUESTION # 47
How will setting the Purpose field within the network definition of a server profile impact the network traffic?
- A. network purpose will define QoS within Logical Interconnect
- B. network purpose can give higher priority for a specific type of traffic
- C. network purpose will impact the traffic only if Virtual Connect modules are used
- D. network purpose does not affect the behavior of the network
Answer: A
NEW QUESTION # 48
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?
- A. Disable HPE Remote Support at toe HPE OneView appliance level
- B. Run the Update Readiness checker tool to evaluate HPE OneView health status
- C. Create a support dump for the appliance and for all managed logical interconnects
- D. Put all servers managed through HPE OneView to maintenance state
Answer: B
NEW QUESTION # 49
Which statement about a server profile for an Apollo system is true?
- A. Virtual WWNs and MAC addresses can be defined
- B. Enclosure Group Is automatically selected
- C. UEFI optimized is the only available boot mode
- D. Fibre Channel connections can be defined
Answer: A
NEW QUESTION # 50
What is a network set?
- A. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
- B. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- C. It is a collection of all networks configured within HPE OneView regardless of network type.
- D. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
Answer: A
NEW QUESTION # 51
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- C. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
Answer: A
Explanation:
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
NEW QUESTION # 52
What is the best practice when deploying an HPE OneView appliance?
- A. Deploy two HPE OneView appliances and configure them in HA mode.
- B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- D. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
Answer: B
NEW QUESTION # 53
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION # 54
Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)
- A. SFTP
- B. SCP
- C. HTTP
- D. HTTPS
- E. FTP
Answer: A,B
Explanation:
Scheduled to be uploaded to the remote location.
NEW QUESTION # 55
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?
- A. A snapshot for imported volumes can be created only by using array management tools
- B. Volumes imported to HPE OneView is managed just like a volume created using HPE OneView
- C. Volumes imported to HPE OneView cannot be removed using the HPE OneView interface
- D. Imported volumes are treated as private volumes and can be only used as boot volumes
Answer: D
NEW QUESTION # 56
You Just downloaded a logical enclosure support dump, but you cannot extract files from the downloaded support dump. What is a likely cause of the issue?
- A. The backup user role must be used to extract the support dump
- B. The support dump does not have a valid HPE OneView certificate
- C. The support dump is encrypted and cannot be unpacked
- D. The support dump for Logical Enclosure can be analyzed only using special tool.
Answer: D
NEW QUESTION # 57
......
The HPE2-T37 exam is a multiple-choice exam that consists of 40 questions. You will have 75 minutes to complete the exam. The passing score for this exam is 70%. The exam is available in English, Japanese, and Simplified Chinese. The exam fee is $200 USD.
The HP HPE2-T37 exam is a certification exam that focuses on the skills and knowledge required to work with HPE OneView. HPE OneView is an infrastructure management software that provides a unified interface to manage servers, storage, and networking devices. The exam is designed for IT professionals who want to enhance their skills and knowledge in HPE OneView and are looking to validate their expertise by obtaining a certification.
Latest HPE2-T37 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.passexamdumps.com/HPE2-T37-valid-exam-dumps.html
HPE2-T37 Exam with Guarantee Updated 81 Questions: https://drive.google.com/open?id=1A4NoYOHM_hDP4yPjq-61tQDm81HnzLsS
