JN0-103 Pre-Exam Practice Tests (Updated 145 Questions) [Q51-Q71]

Share

JN0-103 Pre-Exam Practice Tests | (Updated 145 Questions)

Valid JN0-103 Exam Q&A PDF - One Year Free Update

NEW QUESTION 51

Referring to the exhibit, what does the number inside the square brackets represent?

  • A. protocol reference number
  • B. metric
  • C. route preference
  • D. local preference

Answer: B

 

NEW QUESTION 52
Which two keystrokes will auto-complete a command? (Choose two.)

  • A. Tab
  • B. End
  • C. Spacebar
  • D. Esc

Answer: A,C

 

NEW QUESTION 53
How many IP addresses can be configured on a given interface?

  • A. one primary and one secondary
  • B. one primary and multiple secondary
  • C. one
  • D. as many as you want

Answer: D

 

NEW QUESTION 54
Click the Exhibit button.

Referring to the exhibit, which action would synchronize the local router's clock with the NTP server?

  • A. Configure the correct NTP trusted key using the net trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.
  • B. Configure the NTP server using the set boot-server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
  • C. Reboot the router.
  • D. Issue the set date ntp operational command.

Answer: D

 

NEW QUESTION 55
What are two benefits realized by the disaggregated Junos? (Choose two.)

  • A. There is increased flexibility to use different control plane versions.
  • B. The architecture facilitates programmability through provisioning the control plane, the data path, and the platform APIs.
  • C. The Junos VM becomes hardware-independent and can be deployed on any hypervisor without modification.
  • D. The platform drivers and forwarding engine are removed from the control plane to increase performance.

Answer: B,C

 

NEW QUESTION 56
Which command verifies configuration syntax without applying the changes?

  • A. commit confirmed
  • B. commit comment
  • C. commit and -quit
  • D. commit check

Answer: D

 

NEW QUESTION 57
In which directory are trace option files stored by default?

  • A. /var/log/
  • B. /var/home/
  • C. /var/db/
  • D. /var/tmp/

Answer: A

 

NEW QUESTION 58
Referring to the exhibit,

Which next-hop interface will be used to reach the 10.21.14.16destination?

  • A. ge-0/0/0.0
  • B. ge-0/0/3.0
  • C. ge-0/0/2.0
  • D. ge-0/0/1.0

Answer: D

 

NEW QUESTION 59
You successfully established a BGP session with peer, but do not see any routes learned from the peer, What would cause this problem?

  • A. A security policy is blocking BGP from learning the routes
  • B. A routing policy is blocking BGP from learning the routes
  • C. The firewall filter is blocking the BGP from learning the routes
  • D. Unicast reverse-path-forwarding is blocking BGP from learning the routes

Answer: B

 

NEW QUESTION 60
Referring to the Exhibit,

What information is provided about the route to 192.168.47.0/24?
Choose Two

  • A. There are two next-hops available to 192.168.47.0/24
  • B. There are two active route to 192.168.47.0/24
  • C. There is a single active route to 192.168.47.0/24
  • D. There is a single next-hop available to 192.168.47.0/24

Answer: C,D

 

NEW QUESTION 61
Exhibit:
***Exhibit is Missing***
Which statement is correct when traffic is received from 10.10.10.4?

  • A. The traffic is only rejected
  • B. The traffic is only accepted
  • C. The traffic is counted and rejected
  • D. The traffic is counted and accepted

Answer: C

 

NEW QUESTION 62
Referring to the exhibit,
***Exhibit is Missing***
which command will change the 172.16.10.1/24 IP address to
172.6.100.1/24 IP address?

  • A. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
  • B. Set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
  • C. insert interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address 172.16.100.1/24
  • D. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24

Answer: B

 

NEW QUESTION 63
Referring to the Exhibit,
***Exhibit is Missing***
Which parameter at the end of the command would provide information for troubleshooting purposes?

  • A. No-timestamp
  • B. Print-ascii
  • C. No-resolve
  • D. Extensive

Answer: D

 

NEW QUESTION 64
Referring to the Exhibit,
***Exhibit is Missing***
Which command produced the output shown in the exhibit?

  • A. Show interfaces summary
  • B. Show interfaces terse
  • C. Show interfaces extensive
  • D. Show interfaces filters

Answer: B

 

NEW QUESTION 65
You are in configuration mode at the top of the hierarchy. How would you save your configuration to a file on the router?

  • A. save configuration <filename>
  • B. save config <filename>
  • C. save <filename>
  • D. save run <filename>

Answer: C

 

NEW QUESTION 66
Which statement is correct when traffic is received from 10.10.10.4?

  • A. The traffic is only rejected
  • B. The traffic is only accepted
  • C. The traffic is counted and rejected
  • D. The traffic is counted and accepted

Answer: B

 

NEW QUESTION 67
What information would you find using the CLI help function? (Choose two.)

  • A. explanation of specific system log error messages
  • B. explanation of traceoption events
  • C. Junos technical publications
  • D. tip of the day

Answer: C,D

 

NEW QUESTION 68
Exhibit:

Refer to exhibit, What will be the result?

  • A. The device will boot in a multi-user mode at the configuration prompt
  • B. The device will boot in a Single-user mode at the shell prompt
  • C. The device will boot in a multi-user mode at the shell prompt
  • D. The device will boot in a Single-user mode at the operational prompt

Answer: A

 

NEW QUESTION 69
Click the Exhibit button.

What is the next hop for a packet destined to 192.168.80.98 as shown in the exhibit?

  • A. 172.18.6.1
  • B. 192.168.11.2
  • C. 172.25.11.254
  • D. 172.18.7.1

Answer: D

 

NEW QUESTION 70
What are two examples of transit traffic? (Choose two.)

  • A. SFTP traffic that enters and exits the same interface on the local router.
  • B. SCP traffic that is destined for the router's loopback interface.
  • C. SCP traffic that enters one interface and exits another interface on the local router.
  • D. SFTP traffic that enters one interface and is destined for another interface on the local router.

Answer: A,C

 

NEW QUESTION 71
......

Junos, Associate (JNCIA-Junos) Free Update Certification Sample Questions: https://www.passexamdumps.com/JN0-103-valid-exam-dumps.html