[Jan 10, 2022] Pass Your JN0-348 Dumps Free Latest Juniper Practice Tests
Get Top-Rated Juniper JN0-348 Exam Dumps Now
What Is Juniper Networks Certified Internet Specialist - Enterprise Routing and Switching?
This certification is targeted towards seasoned networking specialists with advanced knowledge of routing and switching implementations within Junos. In general, such a certificate measures the basic knowledge of routing and switching concepts and how they relate to platform configuration and other relevant skills. The prerequisite training for attaining this designation is the mid-level Juniper Networks Certified Internet Associate - Junos certification. Of course, we can’t fail to mention the fact this Juniper certificate is part of the broader Juniper Enterprise Routing and Switching Certification Path which also includes the aforementioned JNCIA-Junos certification.
The Juniper JN0-348 is the qualifying exam for the Juniper Networks Certified Internet Specialist - Enterprise Routing and Switching (JNCIS-ENT) certification. It validates IT specialists with intermediate-level knowledge required to implement routing and switching concepts in the Juniper Junos.
NEW QUESTION 21
You are adding a new EX4300 member switch to your existing EX4300 Virtual Chassis. However, the new member is not running the same Junos version as the other members.
By default, what is the expected behavior in this scenario?
- A. The virtual Chassis will transition into a brain situation between the existing master Routing Engine and the switch running the different version.
- B. The new switch is not recognized by the virtual Chassis.
- C. The new switch will be assigned a member ID and then placed in an inactive state.
- D. The new switch will be assigned a member ID and then placed in an inactive state.
Answer: D
NEW QUESTION 22
Referring to the output shown in the exhibit, which two statements are true? (Choose two.)
- A. The route is an aggregate route
- B. The route is a generate route.
- C. The route is not active.
- D. The route is active
Answer: A,C
NEW QUESTION 23
Click the Exhibit button.
Your router is configured to peer with your ISP's router using BGP. You can only control your BGP configuration.
Which address families are negotiated between the two BGP peers shown in the exhibit?
- A. inet-unicast inet-vpn-unicast 12vpn-signaling
- B. inet-vpn-unicast
- C. inet-unicast inet-vpn-unicast 12vpn
- D. inet-unicast
Answer: D
NEW QUESTION 24
You have configured the route with an IS-IS metric of 2048. However, the IS-IS interface metric of 63 is being applied for the interface of this router.
What must you do to enable larger metric value?
- A. Disable narrow metrics.
- B. Enable level 1 IS-IS routing.
- C. Enable wide metrics.
- D. Restart the IS-IS protocol.
Answer: D
NEW QUESTION 25
You are a service provider and have multiple customers in a building.
You are installing a new switch that can host all of your customers. However, you would like to ensure that one customer cannot see or broadcast to another customer.
You would also like to have them use a common gateway IP address from the building.
What should be used to provide this access?
- A. Layer 2 tunneling
- B. private VLAN
- C. filter-based VLAN
- D. VLAN
Answer: B
NEW QUESTION 26
Which statement is true about the configuration shown in the exhibit?
- A. The preference for the 172.30.25.1 next hop is 7.
- B. 172.30.25.1 is the preferred next hop.
- C. The preferred next hop is 172.30.25.5.
- D. The preference for the 172.30.25.1 next hop is 5.
Answer: C
NEW QUESTION 27
Exhibit.
In the exhibit, each IP subnet in the network is associated with a unique VLAN ID Which action wilt ensure that Host C will communicate with host A and Host B?
- A. Configure a port-based ACL that permits inter-VLAN routing for all configured VLANs.
- B. Configure all switch ports connecting to the host devices as trunk ports associated with all VLANS.
- C. Configure an IRB interface for each VLAN and associate it with its corresponding VLAN
- D. Configure all switch ports connecting to the host devices as access ports associated with a common VLAN.
Answer: C
NEW QUESTION 28
Which three link-specific fields must match between OSPF neighbors before they form an adjacency over a broadcast medium? (Choose three.)
- A. dead interval
- B. router priority
- C. hello interval
- D. options
- E. neighbor
Answer: A,C,E
NEW QUESTION 29
Which statement about IS-IS adjacencies is true?
- A. Adjacency formation between Level 2 routers must have different area IDs.
- B. Adjacency formation between Level 1 routers must have different area IDs.
- C. Adjacency formation between Level 1 routers must have the same area ID.
- D. Adjacency formation between Level 2 routers must have the same area ID.
Answer: C
NEW QUESTION 30
Referring to the exhibit, which three statements are true? (Choose three.)
- A. Frames on interface ge-0/0/2 can be tagged with VLAN ID 101 or VLAN 1.
- B. The switch cannot be managed through the production network.
- C. Interface ge-0/0/1 is an access port.
- D. There are no active ports in the default VLAN.
- E. Frames on interface ge-0/0/0 can be tagged with VLAN ID 101.
Answer: B,C,E
NEW QUESTION 31
Based on the traceoptions output shown in the exhibit, what is the problem with the adjacency?
- A. area mismatch
- B. authentication mismatch
- C. connectivity
- D. MTU mismatch
Answer: A
NEW QUESTION 32
Click the Exhibit button.
You are notified that clients connected to your EX Series switch are not receiving IP addresses from the DHCP server. You examine the switch configuration and notice that DHCP snooping has been enabled.
In this scenario, what would cause the problem?
- A. The DHCP relay setting in the forwarding-options hierarchy has not been configured.
- B. The dynamic ARP inspection feature needs to be enabled on the ge-0/0/0 interface.
- C. The DHCP server's ge-0/0/0 interface has not been configured as a trusted interface.
- D. The location information is not being inserted into the DHCP option 82 requests.
Answer: B
NEW QUESTION 33
Which two port security features use the DHCP snooping database for additional port security? (Choose two.)
- A. MAC learning
- B. IP Source guard
- C. MACsec
- D. dynamic ARP inspection
Answer: B,D
NEW QUESTION 34
Click the Exhibit button.
You are attempting to set up VRRP with R1 and R2 being participating members. You want R1 to be the master router and R2 to be the backup router with the virtual router they create being at address 172.25.100.1.
The virtual router is not pinging from either User A or User B.
Referring to the exhibit, what must be done to correct the problem?
- A. A VRRP authentication type value is needed on R1 and R2.
- B. A VRRP policy is needed on R1 and R2.
- C. The VRRP group value on R1 and R2 must match.
- D. The VRRP priority value on R1 and R2 must match.
Answer: C
NEW QUESTION 35
Which two routers belong to the 172.16.0.0/22 aggregate route? (Choose two.)
- A. 172.16.4.0/24
- B. 172.16.3.0/24
- C. 172.16.0.0/24
- D. 172.16.5.0/24
Answer: B,C
Explanation:
Explanation/Reference:
NEW QUESTION 36
......
Training for Your Test: Is There Easier Path?
While qualifying for your exam may not seem challenging, the real test lies with the choice of study materials. So, we will be covering the two best paths to help you prepare for your Juniper JN0-348 exam easily:
1. Junos Intermediate Routing (JIR)
The Junos Intermediate Routing (JIR) course is a two-day package that validates the mid-level knowledge of routing implementation in line with the actual exam content outline. This course summarizes the details of protocol-independent routing features, OSPF, IP tunneling, high availability, and load balancing. Also, it combines labs and useful demonstrations to help candidates prove their enthusiasm for routing concepts including the configuration and monitoring of the Junos technologies. What’s more, this course adopts the Juniper Networks vSRX Series Services Gateways to help candidates gain vital hands-on skills and is entirely built around the Junos OS Release 18.2R1.9. As an intermediate-level class, all individuals tasked with monitoring or configuring devices running on the Junos OS would benefit from this training. However, all trainees must first demonstrate an understanding of the TCP/IP suite and the OSI model. Besides, they must complete the introductory course, Junos Operating System, before registering for this training. As you remember, this course only runs for two days so you should never assume that the content will be shallow as it remains a comprehensive training covering all aspects of the Junos Enterprise Routing and Switching. When the training initially begins, the instructors will be eager to introduce the course and leave it at that point. Then, they will focus on protocol-independent routing, open shortest path first, and load balancing with filter-based forwarding to complete the first day of training. On the second and last day, the course will verify the knowledge of border gateway protocol, High Availability, and IP tunneling. This stage focuses on the popular concepts of BFD, VRRP, nonstop active routing, BGP attributes, and GRE tunnels.
Passing Key To Getting JN0-348 Certified Exam Engine PDF: https://www.passexamdumps.com/JN0-348-valid-exam-dumps.html
