Get VMware 5V0-41.20 Dumps Questions [2021] To Gain Brilliant Result
5V0-41.20 dumps - PassExamDumps - 100% Passing Guarantee
NEW QUESTION 11
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
- B. Neither profile has been configured to utilize cloud gateways.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
Answer: C
NEW QUESTION 12
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.
The Checkpoint VNF and associated security services were successfully deployed at the London Branch.
Users are now are complaining that Webpages are extremely slow to load, just like before.
What should the administrator do?
- A. Check the flow records in Remote Diagnostics.
- B. Disable and redeploy the VNF with lower memory requirements.
- C. Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.
- D. Reboot the Edge, as this is a requirement in the deployment of a Security VNF.
Answer: B
NEW QUESTION 13
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator wants to achieve better high-availability and network reconvergence between LAN-side BGP Networks and the hub Edges in New York.
What must the administrator do?
- A. Nothing, the system will auto-rebalance connections and will provide sub-second convergence.
- B. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Keep Alive timer.
- C. Modify the Connect and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Connect timer.
- D. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Keep Alive timer is 3 times more than the Hold timer.
Answer: A
NEW QUESTION 14
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
One branch location is not able to communicate with another branch location via dynamic branch-to-branch tunnels. While troubleshooting at the Edge configuration level, the network administrator notices Cloud VPN is not enabled and is grayed out, preventing them from enabling that feature.
- A. Within the Configuration section under Profiles. Within the Monitor section under Network Services.
- B. Within the Test & Troubleshooting section under Remote Diagnostics.
- C. Within the Configuration section under Customer VPN enablement.
- D. Where is the next location to check for and enable the necessary feature?
Answer: C
NEW QUESTION 15
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.
How can this be prevented?
- A. Create two subnets, one for Guest wireless traffic and another one for Production traffic.
- B. Segmentation is currently not supported on VeloCloud Edge.
- C. Have Guest wireless and Production traffic in the same segment but different VLANs.
- D. Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.
Answer: B
NEW QUESTION 16
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).
What is the cause of this issue?
- A. The Edge will be offline for about 4 hours until it has completed the factory image installation.
- B. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
- C. The activation link did not specify the updated image location requiring the Edge to be re-activated.
- D. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
Answer: C
NEW QUESTION 17
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed thatduring certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is
45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.
How should the network administrator resolve the issue?
- A. Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.
- B. Advertise public routes to Office365 and Teams through the New York Hub.
- C. Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.
- D. Prevent the hub from advertising a default route.
Answer: B
NEW QUESTION 18
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
- B. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- C. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- D. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
Answer: C,D
NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?
- A. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.
- B. Check Test & Troubleshoot and review a route table dump of the NY hub site.
- C. Determine if OSPF has been configured on the MPLS Routers at the hub.
- D. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
Answer: D
NEW QUESTION 20
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications.
How should the technician verify if the ports on the Edge are up and working?
- A. Look in Test&Troubleshoot under the Remote Diagnostics and run Interface status.
- B. Look under Administration and System Settings to verify if the interfaces are configured and enabled.
- C. Look in Test&Troubleshoot under the Remote Diagnostics and run System Health.
- D. Look in Test&Troubleshoot under the Remote Actions and run System Health.
Answer: B
NEW QUESTION 21
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Where can the network administrator check to see what routes are present on the London-site Edge?
- A. Log into the VCO > Monitoring > Overlay Flow Control
- B. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"
- C. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"
- D. Log into the VCO > Configuration > Overlay Flow Control
Answer: B
NEW QUESTION 22
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?
- A. Internet Backha.
- B. The other Edge location is advertising a secure route for the application's subnet.
- C. The underlay path is not available forcing traffic into the overlay.
- D. uI has been configured forcing traffic into the underlay towards the hub.
- E. Configuring Business Policy Direct settings have no affect on traffic flows.
Answer: D
NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100%.
Where should the administrator verify this information?
- A. In the VCO > Monitor > Click London_Site01 > Click the System Tab
- B. In the VCO > Remote Troubleshooting > Remote Actions > System Status
- C. In the VCO > Monitor > Alerts
- D. In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status
Answer: A
NEW QUESTION 24
Scenario 3:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
The network administrator determines that dynamic routes to SD-WAN sites are missing at the San Jose branch router. The network administrator decides to look into the configurations of hub Edges. All SD-WAN branch sites must use a hub to communicate with the San Jose site. Best practices have been implemented at these SD-WAN sites.
Where should the administrator check first to verify if the configuration is correct?
- A. Verify the static routes to San Jose from all Branches are configured.
- B. Verify that the NVS feature is enabled in Cloud VPN.
- C. Verify that redistribution between the primary hub site and San Jose is enabled.
- D. Verify that redistribution at the Dallas Hybrid Site is enabled for San Jose to use as a peering point.
Answer: A
NEW QUESTION 25
......
Get 100% Passing Success With True 5V0-41.20 Exam: https://www.passexamdumps.com/5V0-41.20-valid-exam-dumps.html
Premium Quality VMware 5V0-41.20 Online dumps: https://drive.google.com/open?id=1I9q5GXDQobTl53D34j8V2b8WT5IWDqi_
