Get May-2024 updated Exam MS-721 Dumps with New Questions
100% Pass Guarantee for MS-721 Exam Dumps with Actual Exam Questions
Candidates who pass the MS-721 exam will earn the Collaboration Communications Systems Engineer certification, which demonstrates their expertise in designing and implementing communication and collaboration solutions that meet the needs of modern businesses. Collaboration Communications Systems Engineer certification can help professionals stand out in the job market, as it shows that they have the knowledge and skills needed to be successful in this field.
The MS-721 exam covers a range of topics related to Microsoft collaboration and communication solutions, including Skype for Business, Microsoft Teams, Exchange, and Office 365. It tests candidates on their ability to design, deploy, configure, and troubleshoot these technologies in a variety of scenarios. Successful candidates will have a deep understanding of Microsoft collaboration and communication solutions and will be able to apply their knowledge to solve complex business problems. They will also be able to work effectively with other IT professionals to ensure that these solutions are integrated smoothly into an organization's existing infrastructure.
NEW QUESTION # 107
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing by using a certified Session Border ControNer CSBC). The FQDN of the SBC is sbc1.contoso.com. You use signaling port 5067.
You cannot place calls and receive an error message in the Microsoft Teams admin center as shown in the following exhibit.
What is a possible cause of the issue?
- A. The firewall blocks traffic on pan 5067
- B. Location-Based Routing is enabled for the SBC.
- C. Calling plan licenses are not assigned to users.
- D. The SIP options are disabled.
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certificate-issues
NEW QUESTION # 108
You need to meet the technical requirements for the returns department.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 109
You need to provision a Microsoft Teams-certified common area phone device at a field site. The solution must ensure that a standard user can complete the physical handset tasks without sharing credentials.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - From the Microsoft Teams admin center, upload the MAC address of the device.
2 - From the Microsoft Teams admin center, generate a verification code
3 - Instruct the user to enter the verification code on the device
4 - From the Microsoft Teams admin center, remotely sign-in a user to the device Reference:
https://docs.microsoft.com/en-us/MicrosoftTeams/devices/remote-provision-remote-login
NEW QUESTION # 110
Your company has a Microsoft Teams deployment.
You need to configure meetings to meet the following requirements:
* The company logo must be added to meeting invites.
* Users must be prevented from selecting the webinar meeting template when creating a new meeting from the Teams client.
What should you configure to meet each requirement? To answer, drag the appropriate options to the correct requirements. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 111
You are adding new sites to your company.
The reporting team needs location-based reports in Microsoft Power B1 that include the subnet information of the new sites.
You need to add the information to Microsoft Teams.
What should you do?
- A. From the Microsoft Teams admin center, add the subnets to the Network planner.
- B. From the Microsoft Teams admin center, define a network topology.
- C. From the Microsoft Teams admin center, define a network subnet.
- D. From the Microsoft Call Quality Dashboard, upload tenant data.
Answer: B
Explanation:
Reference: https://docs.microsoft.com/en-us/microsoftteams/cqd-upload-tenant-building-data
NEW QUESTION # 112
You have an analog phone system.
You plan to migrate to Microsoft Teams Phone.
You need to recommend devices for common area phones that any user can use. The solution must meet the following requirements;
* Can access the Teams directory for dial by name.
* Can be administered remotely.
* Can place and pick up calls.
* Support hot desking.
* Minimize costs.
Which type of devices should you recommend?
- A. the existing analog handsels
- B. Microsoft-certified 3PIP handsets
- C. Microsoft Teams Rooms devices
- D. Microsoft-certified headsets
- E. Microsoft Teams-certified handsets
Answer: C
NEW QUESTION # 113
You have a Microsoft Teams Phone deployment that uses Direct Routing.
You connect a new Session Border Controller (SBC).
You need to verify that all the voice features work as expected for calls that traverse the SBC What should you use?
- A. Microsoft 365 network connectivity test tool
- B. Microsoft Remote Connectivity Analyzer
- C. the SIP Tester client script
- D. Microsoft Teams Network Assessment Tool
Answer: C
NEW QUESTION # 114
You need to configure a toll-free dial in bridge for Teams meetings. The solution must meet the technical requirements.
Which three prerequisites must be met before you can assign the toll-free bridge to Teams meeting organizers?
Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Assign a phone number to a resource account.
- B. Assign a phone number to the bridge.
- C. Purchase Communications Credits.
- D. Get a Dedicated conference bridge (Toll Free) number.
- E. Get an auto attendant toll-free number.
- F. From the meeting policy, set Allow dial -in users to bypass the lobby to On.
- G. Purchase a Microsoft 365 Domestic and International Calling Plan license.
Answer: B,C,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/set-up-audio-conferencing-in-teams
NEW QUESTION # 115
Your company has offices in 10 countries. The company has a tenant dial plan configured for each country.
The company recently opened an office in a new country.
You need to create a new tenant dial plan that meets the unique dialing requirements of the new country.
What should you do?
- A. Run theHew-CsTenentDialPlan cmdlet.
- B. From the Microsoft Teams admin center, select Voice select Phone numbers, and then seleci Add
- C. From the Microsoft Teams admin center, select Voice, select Voice routing policies and then select Add
- D. From the Microsoft Teams admin center, select Voice, select Calling policies, and then select Add
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 116
You have a Microsoft Teams Phone deployment that contains two users named User1 and User2.
User1 will be on leave for two weeks.
You need to redirect all calls to the phone number of User1 to the phone number of User2. The solution must minimize administrative effort.
What should you modify for User1?
- A. the call delay and order settings
- B. the phone number type
- C. the call delegation settings
- D. the voicemail transfer target settings
Answer: C
Explanation:
Use the Teams admin center
You can use the Teams admin center to configure call forward and unanswered settings, group call pickup, and call delegation for your users.
To configure immediate call forward settings:
In the Teams admin center, go to Users > Manage users and select a user.
On the user details page, go to the Voice tab.
Under Call answering rules, select Be immediately forwarded, and select the appropriate call forward type and destination.
To configure simultaneous ringing, on the same page select Ring the user's devices. In the Also allow drop-down, select the appropriate simultaneous ringing setting.
To configure unanswered settings, on the same page select the appropriate setting in the If unanswered drop-down. In the Ring for this many seconds before redirecting drop-down, specify the number of seconds to wait.
The configuration of call delegation and group call pickup are integrated into the call forward and unanswered settings by selecting the appropriate type. For example, to configure that calls should also ring the user's delegates, on the same page select Call delegation under Also allow. Then add the appropriate delegates by selecting Add people and clicking Save.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/user-call-settings
NEW QUESTION # 117
You have a Microsoft Teams Phone deployment.
You are configuring emergency services for Direct Routing.
You need to notify a group of users when an emergency number is dialed.
What should you configure in the Microsoft Teams admin center?
- A. an emergency call routing policy
- B. an emergency calling policy
- C. a calling policy
- D. a voice routing policy
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/manage-emergency-calling-policies
NEW QUESTION # 118
You have a Microsoft Teams Phone deployment.
You have routing rules for unassigned phone numbers as shown in the following exhibit.
You have unassigned numbers of +61370105005 and +61370105010.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 119
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to create a new call queue to route calls to support agents. The support agents must be able to see their call queue history and the shared transcribed voicemail. The solution must minimize administrative effort.
Solution: You redirect calls for the call queue to a shared voicemail box.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Reference:
https://www.orbid365.be/shared-voicemail-arrives-in-teams/
NEW QUESTION # 120
You need to provision a Microsoft Teams-certified common area phone device at a field site. The solution must ensure that a standard user can complete the physical handset tasks without sharing credentials.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - From the Microsoft Teams admin center, upload the MAC address of the device
2 - From the Microsoft Teams admin center, generate a verification code
3 - Instruct the user to enter the verification code on the device
4 - From the Microsoft Teams admin center, remotely sign-in a user to the device Reference:
https://docs.microsoft.com/en-us/MicrosoftTeams/devices/remote-provision-remote-login
NEW QUESTION # 121
You are configuring the new call queue to replace the response group.
Which setting should you disable to ensure that the agents can receive calls from the call queue?
- A. Music on hold
- B. Conference mode
- C. Round robin
- D. Attendant routing
Answer: B
NEW QUESTION # 122
You are deploying Microsoft Teams Phone.
You have offices in the United States, the United Kingdom, Brazil, India, and China.
You will use Direct Routing for all the locations.
You need to create a network topology for roaming bandwidth policies.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. From the Microsoft 365 admin center, assign a usage location.
- B. Add the Teams client public IP addresses to the Trusted IPs list.
- C. Create a network site.
- D. Set Preferred country or region for media traffic for the Session Border Controller (SBC).
- E. Implement dynamic emergency calling with Presence Information Data Format Location Object (PIDF-LO).
Answer: B,C,E
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/manage-your-network-topology
NEW QUESTION # 123
Your network contains an on-premises Active Directory Domain Services (AD DS) domain named contoso.com.
You have a Microsoft 365 subscription.
You plan to implement Microsoft Teams Rooms shared room video conferencing.
You deploy 50 Teams Rooms on Windows devices and join each device to contoso.com.
You need to enable Direct Guest Join on all 50 devices. The solution must minimize administrative effort.
What should you do?
- A. From the Microsoft Teams admin center, configure a configuration policy.
- B. From the Microsoft Teams admin center, modify the Guest access settings.
- C. Run the Set-CsVideoInteropServiceProvider cmdlet.
- D. Deploy a SkypeSettings.xml file to each device by using Group Policy.
Answer: A
NEW QUESTION # 124
......
MS-721 exam dumps with real Microsoft questions and answers: https://www.passexamdumps.com/MS-721-valid-exam-dumps.html
Today Updated MS-721 Exam Dumps Actual Questions: https://drive.google.com/open?id=1CcrzWV4whDm602JppnEOF8YKLAXVJMbr
