Get JN0-682 Products Practice Material for JN0-682 Exam Question Preparation
Most Reliable Juniper JN0-682 Training Materials
Juniper JN0-682 (Data Center, Professional (JNCIP-DC)) Exam is a challenging and rewarding certification that can help you take your career to the next level. Whether you are a seasoned IT professional or just starting out in the field, JN0-682 exam can provide you with the credentials you need to succeed in the competitive world of data center networking.
Juniper JN0-682 exam consists of 65 multiple-choice questions that must be completed within 120 minutes. JN0-682 exam is computer-based and can be taken at any authorized Pearson VUE testing center. The questions are designed to evaluate the candidate's ability to configure, troubleshoot, and optimize Juniper Networks' data center products, including Junos OS, Contrail Networking, and Juniper Networks' switching and routing platforms.
NEW QUESTION # 10
You are an architect for an enterprise organization that currently operates three data centers with plans to expand to five data centers in the next year. You already notice large amounts of BUM flooding and must control this issue before implementing the next two data centers.
Which feature would address this issue?
- A. VXLAN BUM traffic filter
- B. mesh groups
- C. type-5 routes
- D. type-6 routes
Answer: C
NEW QUESTION # 11
You are asked to build a single export policy that can be applied to all devices to advertise only loopback IP addresses in the 172.16.0.0/24 subnet into your EBGP IP fabric. In this scenario, which two solutions would accomplish this task? (Choose two.) A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: B
NEW QUESTION # 12
You have deployed a multitenant EVPN-VXLAN fabric. You must have the routes in the BLUE VRF show up in the RED VRF. In this scenario, how would you achieve this goal?
- A. Configure the BLUE route target in the RED VRF.
- B. Configure a VRF import policy on the RED VRF that matches the BLUE VRF route target.
- C. Configure a VRF export policy on the BLUE VRF that matches the RED VRF route target.
- D. Configure the RED route target in the BLUE VRF.
Answer: A
NEW QUESTION # 13
Which two combinations are supported when configuring a Virtual Chassis Fabric? (Choose two.)
- A. Four spine nods and 20 leaf nodes
- B. two spine nods and 16 leaf nodes
- C. Four spine nods with 16 leaf nodes
- D. Two spine and 28 leaf nodes
Answer: B,C
NEW QUESTION # 14
You are logged in to Leaf 1. When examining the routing table, you notice that you have no routes from Leaf
2.
Referring to the exhibit, which two commands would you use to troubleshoot the problem? (Choose two.)
- A. From Spine 1, issue the show route advertising-protocol bgp 172.16.1.2 command.
- B. From Leaf 1, issue the show route receive-protocol bgp 172.16.1.1 command.
- C. From Leaf 2, issue the show route advertising-protocol bgp 172.16.1.2 command.
- D. From Spine 1, issue the show route advertising-protocol bgp 172.16.1.1 command.
Answer: A,B
NEW QUESTION # 15
The configuration shown in the exhibit is intended to set up assisted replication but will not commit. Which action will create a valid configuration in this situation?
- A. Delete replicator inet 192.168.100.1.
- B. Change the 10.0 address to 192.168.100.1 primary.
- C. Change the replicator inet address to 192.168.100.101.
- D. Change the replicator inet address to 192.168.100. 51.
Answer: C
NEW QUESTION # 16
You are troubleshooting an L3VPN that is part of an EVPN/MPLS DCI. You notice that the EVPN overlay BGP session toward 10.29.50.4 is unable to establish.
Why is the BGP session failing to establish?
- A. There is no route for 192.168.5.5 an VPN net 0.
- B. There is no route for 192.168.5.5. in inet 3.
- C. The route-distinguisher value on the local PE is incorrect
- D. The vrf-table label value is not configured in the remote PE.
Answer: B
NEW QUESTION # 17
Exhibit.
Referring to the exhibit, what happens when you initiate ZTP on a QFX5120 switch running Junos 21.3R1.9?
- A. ZTP performs the Junos installation but skips the configuration.
- B. ZTP skips both the Junos installation and the configuration.
- C. ZTP performs both the Junos installation and the configuration.
- D. ZTP skips the Junos installation but applies the configuration.
Answer: C
NEW QUESTION # 18
You host a multitenant data center that runs VMware. You must perform deep packet inspection on all
inter-tenant traffic that is flowing between the VMs within the same hypervisor. Your solution must provide
the security services without needing to leave the physical device.
In this scenario, what should you do to solve this problem?
- A. Use VLANs to isolate each tenant's networks and use an SRX Series device to evaluate inter-tenant
traffic. - B. Use a vMX device to isolate each tenant's network and use firewall filters to evaluate inter-tenant
traffic. - C. Use a VLANs to isolate each tenant's network and use IP tables to evaluates inter-tenant traffic.
- D. Use separate vswitches to isolate each-tenant's network and use and use a vSRX device to evaluate
inter-tenant traffic.
Answer: D
NEW QUESTION # 19
Referring to the VTEP output shown in the exhibit, which two statements are true? (Choose two.)
- A. The MAC address 52:54:00:5e:88:6a belongs to a remote host.
- B. The MAC address.52:54:00:5e:88:6a belongs to a local host.
- C. The MAC address 52:54:00:2c:4b:a2 belongs to a remote host.
- D. The MAC address 52:54:00:2c:4b:a2 belongs to a local host.
Answer: B,C
Explanation:
Explanation
logical interface is vtep = MAC learned from remote vtep logical interface is local (i.e. xe-0/0/*) = MAC
learned locally via normal bridging
NEW QUESTION # 20
Which IP fabric underlay protocol provides the highest degree of scalability?
- A. OSPF
- B. IS-IS
- C. RIP
- D. EBGP
Answer: D
NEW QUESTION # 21
Referring to the exhibit, DC1 and DC2 have a DCI across a service provider WAN connection. Host1 in DC1 must have Layer 2 connectivity to host2 in DC2. A VXLAN tunnel must be created between VTEP1 and VTEP2.
In this scenario, which statement is true?
- A. VXLAN Layer 3 gateway must be provisioned at the Super Spine layer.
- B. The service provider WAN connection be an MPL5-based WAN connection.
- C. VTEP and VTEP2 must peer using IBGP.
- D. A route to the loopback address on VTEP must be present on VTEP1.
Answer: D
NEW QUESTION # 22
You are designing a network for a small data center.
In this scenario, which underlay protocol allows for the simplest implementation?
- A. IGGP
- B. MPLS
- C. EBGP
- D. OSPF
Answer: D
NEW QUESTION # 23
An EVPN-signaled VXLAN overlay has been deployed in the network shown in the exhibit. An EVPN LAG has been configured to connect host1 to the network, and device leaf1 has been elected as the designated forwarder.
In this scenario, which statement is true?
- A. An ICCP control link must be configured between leaf1 and Ieaf2.
- B. The Ieaf3 device will only receive an advertisement to the LAG segment from leaf1.
- C. The Ieaf3 device can utilize both leaf1 and Ieaf2 to forward unicast packets from host2 to host1.
- D. Broadcast packets sent from host2 will not be forwarded to Ieaf2.
Answer: B
NEW QUESTION # 24
Referring to the exhibit, DC1 and DC2 have a DCI across a service provider WAN connection. Host1 in DC1
must have Layer 2 connectivity to host2 in DC2. A VXLAN tunnel must be created between VTEP1 and
VTEP2.
In this scenario, which statement is true?
- A. VXLAN Layer 3 gateway must be provisioned at the Super Spine layer.
- B. The service provider WAN connection be an MPL5-based WAN connection.
- C. VTEP and VTEP2 must peer using IBGP.
- D. A route to the loopback address on VTEP must be present on VTEP1.
Answer: D
NEW QUESTION # 25
......
LATEST JN0-682 Exam Practice Material: https://www.passexamdumps.com/JN0-682-valid-exam-dumps.html
The Realest Study Materials JN0-682 Dumps: https://drive.google.com/open?id=1wBegqJ5ijdfpCa5cJ9H1ay4LDrjeXuUr
