Get Instant Access of 100% REAL JN0-481 DUMP Pass Your Exam Easily
JN0-481 Free Exam Questions with Quality Guaranteed
NEW QUESTION # 57
What is the purpose of an interface map in Juniper Apstra?
- A. An interface map associates a logical device with a device profile.
- B. An interface map specifies a connection between the interfaces of two devices.
- C. An interface map specifies the connections between racks in a template.
- D. An interface map specifies the number of ports and the port speeds of a logical device
Answer: B
Explanation:
An interface map is a configuration template that maps interfaces between logical devices and physical hardware devices (represented with device profiles) while adhering to vendor specifications. An interface map specifies a connection between the interfaces of two devices, such as a leaf and a spine, a leaf and a server, or a leaf and an external gateway. An interface map can also specify port transformations, such as breaking out a 40 GbE port into four 10 GbE ports, or disabling unused ports. An interface map can be used to achieve the intended network configuration rendering and to enable features such as LAG, ESI-LAG, or MLAG.
NEW QUESTION # 58
What is the purpose of using a routing zone inside Juniper Apstra software?
- A. A routing zone is used to enable L4-L7 inspection inside the fabric.
- B. A routing zone defined at the Apstra manager level requires firewalls to be deployed.
- C. A routing zone is used to enable the communication between two VNIs within a VRF.
- D. A routing zone is defined to secure the routing protocols.
Answer: C
Explanation:
A routing zone is an L3 domain, the unit of tenancy in multi-tenant networks. You create routing zones for tenants to isolate their IP traffic from one another, thus enabling tenants to re-use IP subnets. In addition to being in its own VRF, each routing zone can be assigned its own DHCP relay server and external system connections. You can create one or more virtual networks within a routing zone, which means a tenant can stretch its L2 applications across multiple racks within its routing zone. For virtual networks with Layer 3 SVI, the SVI is associated with a Virtual Routing and Forwarding (VRF) instance for each routing zone isolating the virtual network SVI from other virtual network SVIs in other routing zones.
NEW QUESTION # 59
What does VXLAN use to uniquely label and identify broadcast domains?
- A. virtual network identifier (VNI)
- B. agent circuit identifier (ACI)
- C. VLAN ID
- D. end system identifier (ESI)
Answer: A
Explanation:
VXLAN (Virtual Extensible LAN) uses a Virtual Network Identifier (VNI), a 24-bit field in the VXLAN header, to uniquely label and identify broadcast domains. Each VNI maps to a Layer 2 segment, allowing scalable network virtualization across Layer 3 infrastructures.
NEW QUESTION # 60
In Juniper Apstra terminology, to which network operating system concept does a routing zone refer?
- A. VLAN
- B. VRF
- C. IRB
- D. access list
Answer: B
Explanation:
In Juniper Apstra terminology, a routing zone corresponds to a VRF (Virtual Routing and Forwarding) instance in a network operating system. It represents a separate routing table that provides traffic isolation between tenants or applications.
NEW QUESTION # 61
What are three port group roles that you are allowed to assign to a logical device? (Choose three.)
- A. generic
- B. leaf
- C. root
- D. empty
- E. spine
Answer: A,B,E
Explanation:
When assigning port group roles to a logical device in Juniper Apstra, the valid roles you can assign include:
Leaf - for ports that connect to servers or access layer devices.
Spine - for ports that connect to spine or core switches.
Generic - for ports that connect to systems not playing a fabric role (e.g., firewalls, external routers, or appliances).
NEW QUESTION # 62
Within Managed Devices in the Juniper Apstra Ul, you notice that several devices have the OOS- Quarantined status. The devices cannot be added to any blueprint. Which action would solve this problem?
- A. Upload a new pristine configuration.
- B. Fix the hardware issues with the quarantined devices.
- C. Install the agent, even though connectivity is established.
- D. Acknowledge the device.
Answer: D
Explanation:
When an agent installation is successful, devices are placed into the Out of Service Quarantined (OOS-QUARANTINED) state using the Juniper Apstra UI. This state means that the device is not yet managed by Apstra and has not been assigned to any blueprint. The device configuration at this point is called Pristine Config. To make the device ready for use in a blueprint, you need to acknowledge the device, which is a manual action that confirms the device identity and ownership. Acknowledging the device changes its status to Out of Service Ready (OOS- READY).
NEW QUESTION # 63
You are using Juniper Apstra to create your DC fabric. The fabric requires the use of configlets and requires a property set, which you call "test." While creating the property set, you encounter an error message.
Referring to the exhibit, how would you correct the error?
- A. Remove the trailing blank lines.
- B. Use the Builder option for input type of YAML.
- C. Use valid YAML syntax of key: value.
- D. Change to JSON and click Create.
Answer: C
Explanation:
In Apstra 5.1, a property set is a structured data object used to parameterize configlets (config templates). The key point is that Apstra expects the property set "values" to be a dictionary/map so that the configlet can reference variables by name (for example, {{ NTP_SRV1 }} or nested keys). The exhibit shows a server-side validation error indicating that values_yaml "should be dict," which occurs when the YAML content is entered as a single scalar string (such as try_ksh) instead of a key-value mapping.
To correct this, rewrite the YAML using valid key: value syntax so the top-level structure is a dictionary. For example, a minimal valid property set would look like role: try_ksh (or any meaningful key name aligned to the variables your configlet expects). If multiple variables are needed, add additional keys, and if your configlet uses nested objects, represent them as nested YAML dictionaries. This correction aligns the property set with Apstra's intent-based model: values are stored as named properties and then rendered deterministically into device configuration. This is independent of Junos v24.4 specifics; Junos becomes relevant when the rendered configlet content is applied to devices, but the property set itself must first validate as a dictionary for Apstra to render the template correctly.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/task/property-set-datacenter-design-create.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/property-set-datacenter-design.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/ref/property-sets-api.html
NEW QUESTION # 64
You are creating a new security policy using Juniper Apstra.
Referring to the exhibit, which application point should you select to allow or deny traffic to or from a particular VRF?
- A. Internal Endpoint
- B. External Endpoint
- C. Virtual Network
- D. Routing Zone
Answer: D
Explanation:
In Apstra 5.1, multitenancy is modeled using routing zones, which map directly to the network operating system concept of a VRF. A VRF is an isolated Layer 3 routing instance with its own routing table and forwarding context, and Apstra's routing zone is the intent-based abstraction used to define and manage that isolation consistently across the fabric. Therefore, if your goal is to allow or deny traffic to or from a particular VRF, you must select Routing Zone as the security policy application point.
This choice enables you to express policy at the tenant boundary (VRF boundary) rather than at a single segment boundary. In EVPN-VXLAN data center fabrics, a tenant VRF commonly contains multiple virtual networks (VXLAN segments) and their associated IRB gateways on the leaf switches. Applying policy at the routing-zone level allows Apstra to compile intent and deploy enforcement consistently where traffic enters or exits that VRF context-typically as ACL constructs rendered as Junos firewall filters on the appropriate interfaces (for example, IRB interfaces for east-west controls or border interfaces for north-south controls).
By contrast, selecting Virtual Network targets a single segment (not the whole VRF), and Internal/External Endpoint targets specific endpoints or endpoint groups rather than the VRF-wide policy boundary. Hence, Routing Zone is the correct application point when policy scope is the VRF.
NEW QUESTION # 65
Which three statements describe intent-based analytics? (Choose three.)
- A. It collects information from vendor websites.
- B. It is a real-time information processing pipeline.
- C. It is used to establish network performance baselines.
- D. It alerts the network operator when network performance moves away from the baseline.
- E. It indicates when device operating versions require updating.
Answer: B,C,D
Explanation:
Intent-based analytics (IBA) is a feature of Juniper Apstra that allows you to combine intent from the network design with current and historic data from devices to reason about the network at- large.
IBA has the following characteristics:
It is a real-time information processing pipeline. This means that IBA can ingest, process, and analyze large amounts of data from devices in real time, using agents and probes.
Agents are software components that collect data from devices and send them to the Apstra server.
Probes are user-defined queries that aggregate data across devices and generate advanced data that can be more easily reasoned about.
It is used to establish network performance baselines. This means that IBA can use the advanced data to measure and monitor the network performance against the expected outcomes and service levels.
IBA can also use the historic data to create baselines that represent the normal behavior and state of the network.
It alerts the network operator when network performance moves away from the baseline. This means that IBA can detect and report any anomalies or deviations from the baseline or the intent in the network.
IBA can also provide insights and recommendations for troubleshooting and resolving the issues.
NEW QUESTION # 66
You want to make a widget appear on the main dashboard in Juniper Apstr
- A. In this scenario, which statement is correct?
- B. Set the Default toggle switch to On for the desired widget.
- C. Widgets automatically appear on the blueprint dashboard.
- D. On the blueprint dashboard, click on the Add Widget option.
- E. When creating the widget, select the Add to Blueprint Dashboard option.
Answer: C
Explanation:
In Juniper Apstra, a widget is a graphical element that displays data from an intent-based analytics (IBA) probe. A widget can be used to monitor different aspects of the network and raise alerts to any anomalies. A widget can be viewed by itself or added to an analytics dashboard. A dashboard is a collection of widgets that can be customized and organized according to the user's preference. The main dashboard in Juniper Apstra is the blueprint dashboard, which is the default view that shows the network information and configuration for the active blueprint. A blueprint is a logical representation of the network design and intent. The blueprint dashboard can display the system-generated dashboards, the user-generated dashboards, and the individual widgets that are relevant to the network.
To make a widget appear on the main dashboard in Juniper Apstra, the user needs to set the Default toggle switch to On for the desired widget. This will add the widget to the blueprint dashboard, where it can be viewed along with other network information. The user can also remove the widget from the blueprint dashboard by setting the Default toggle switch to Off for the widget.
NEW QUESTION # 67
Which Juniper Apstra role-based access control (RBAC) role grants full administrative control over the entire Apstra system, including user management?
- A. Tenant Admin
- B. Blueprint Admin
- C. Viewer
- D. Superuser
Answer: D
Explanation:
The Superuser role in Juniper Apstra has full administrative privileges across the entire system, including the ability to create and manage users, roles, blueprints, and all other system-wide settings. This is distinct from more limited roles like Blueprint Admin, which restricts administrative control to specific blueprints only.
NEW QUESTION # 68
Multilenancy for applications is achieved by creating virtual networks (VNs) within which construct?
- A. routing zone
- B. connectivity template
- C. routing table
- D. security policy
Answer: A
Explanation:
A routing zone is an L3 domain, the unit of tenancy in multi-tenant networks. You create routing zones for tenants to isolate their IP traffic from one another, thus enabling tenants to re-use IP subnets. In addition to being in its own VRF, each routing zone can be assigned its own DHCP relay server and external system connections. You can create one or more virtual networks within a routing zone, which means a tenant can stretch its L2 applications across multiple racks within its routing zone.
NEW QUESTION # 69
You are using tags within Juniper Apstra for searching information in the blueprint about existing elements.
In this scenario, what is another construct that uses tags?
- A. tenants
- B. configlets
- C. services
- D. device context
Answer: C
Explanation:
In Juniper Apstra, tags are used not only for searching and filtering blueprint elements (like interfaces, generic systems, and virtual networks) but are also applied to services. This allows for better organization, classification, and management of services within the blueprint.
NEW QUESTION # 70
Multilenancy for applications is achieved by creating virtual networks (VNs) within which construct?
- A. routing zone
- B. connectivity template
- C. routing table
- D. security policy
Answer: A
Explanation:
A routing zone is an L3 domain, the unit of tenancy in multi-tenant networks. You create routing zones for tenants to isolate their IP traffic from one another, thus enabling tenants to re-use IP subnets. In addition to being in its own VRF, each routing zone can be assigned its own DHCP relay server and external system connections. You can create one or more virtual networks within a routing zone, which means a tenant can stretch its L2 applications across multiple racks within its routing zone.
NEW QUESTION # 71
You are trying to deploy a five-stage template to a blueprint as shown in the exhibit. You cannot see your template name in the list of available templates.
In this scenario, which statement is correct?
- A. You must include "five-stage" in the template name for it to appear in the list.
- B. Only Freeform-type blueprints support five-stage templates.
- C. The COLLAPSED option should be selected.
- D. The POD BASED option should be selected.
Answer: D
Explanation:
The exhibit shows that the RACK BASED filter is currently selected, which limits the visible templates to only those designed for rack-based topologies (e.g., 3-stage). Five-stage designs are based on POD-based templates, which introduce an additional layer in the fabric hierarchy.
To see and select your five-stage template, you must select the POD BASED filter, which will reveal templates structured for five-stage IP Clos fabrics.
NEW QUESTION # 72
You want to make a widget appear on the main dashboard in Juniper Apstr a. In this scenario, which statement is correct?
- A. Set the Default toggle switch to On for the desired widget.
- B. Widgets automatically appear on the blueprint dashboard.
- C. On the blueprint dashboard, click on the Add Widget option.
- D. When creating the widget, select the Add to Blueprint Dashboard option.
Answer: A
Explanation:
In Juniper Apstra, a widget is a graphical element that displays data from an intent-based analytics (IBA) probe. A widget can be used to monitor different aspects of the network and raise alerts to any anomalies. A widget can be viewed by itself or added to an analytics dashboard. A dashboard is a collection of widgets that can be customized and organized according to the user's preference1.
The main dashboard in Juniper Apstra is the blueprint dashboard, which is the default view that shows the network information and configuration for the active blueprint. A blueprint is a logical representation of the network design and intent. The blueprint dashboard can display the system-generated dashboards, the user-generated dashboards, and the individual widgets that are relevant to the network2.
To make a widget appear on the main dashboard in Juniper Apstra, the user needs to set the Default toggle switch to On for the desired widget. This will add the widget to the blueprint dashboard, where it can be viewed along with other network information. The user can also remove the widget from the blueprint dashboard by setting the Default toggle switch to Off for the widget3. Therefore, the statement D is correct in this scenario.
The following three statements are incorrect in this scenario:
When creating the widget, select the Add to Blueprint Dashboard option. This is not true, because there is no such option when creating a widget in Juniper Apstra. The user can only select the widget type, the probe, and the display mode when creating a widget4. To add the widget to the blueprint dashboard, the user needs to set the Default toggle switch to On for the widget after creating it3.
On the blueprint dashboard, click on the Add Widget option. This is not true, because there is no such option on the blueprint dashboard in Juniper Apstra. The user can only view, edit, or delete the existing widgets and dashboards on the blueprint dashboard2. To add a widget to the blueprint dashboard, the user needs to set the Default toggle switch to On for the widget from the widgets table view3.
Widgets automatically appear on the blueprint dashboard. This is not true, because widgets do not automatically appear on the blueprint dashboard in Juniper Apstra. The user needs to manually add the widgets to the blueprint dashboard by setting the Default toggle switch to On for the widgets that they want to see on the blueprint dashboard3. The only exception is the widgets that are part of the system-generated dashboards, which are automatically created and added to the blueprint dashboard based on the state of the active blueprint2.
Reference:
Widgets Overview
Blueprint Summaries and Dashboard
Widgets Introduction
Create Widget
NEW QUESTION # 73
You have a configuration deviation in the Juniper Apstra dashboard. What does this anomaly indicate in this scenario?
- A. A device is ready to be configured by the system.
- B. A device cannot support a configuration command sent by the system.
- C. A device's configuration has been changed using a method outside of Apstra.
- D. A device's configuration has been updated by the server.
Answer: C
Explanation:
A configuration deviation (also called a configuration anomaly) in Apstra indicates that the device's running configuration differs from Apstra's intended (golden) configuration for that node. In day-to-day operations, this most commonly occurs when an operator makes a change outside of Apstra's control, such as entering commands directly on the device CLI (for example, on a Junos v24.4 switch), using another automation system, or applying an out-of-band configuration method.
Apstra continuously compares the device's operational configuration against what it expects based on blueprint intent. When it detects drift, it raises a deviation anomaly so operators can decide how to restore compliance. Typical remediations are either (1) remove/revert the out-of-band change so the device matches intent again, or (2) explicitly acknowledge the change in Apstra (for example, via an accept/suppress workflow, depending on the exact UI action and version), so the deviation is no longer treated as unexpected.
While it is also possible for a deviation to be triggered by a device not accepting a rendered command (capability mismatch), the question asks what the anomaly indicates in this scenario; the primary meaning of "configuration deviation" is configuration changed outside of Apstra and therefore the network is no longer aligned with the intended state. That corresponds to option C.
NEW QUESTION # 74
Using the Juniper Apstra multitenancy capabilities, which approach will allow a tenant to interconnect two different routing zones?
- A. Interconnection is the default behavior.
- B. Interconnection cannot be enabled.
- C. Use interconnection through an external gateway.
- D. Use interconnection through the fabric spine nodes.
Answer: C
Explanation:
A routing zone is an L3 domain, the unit of tenancy in multi-tenant networks. You create routing zones for tenants to isolate their IP traffic from one another, thus enabling tenants to re-use IP subnets. In addition to being in its own VRF, each routing zone can be assigned its own DHCP relay server and external system connections. You can create one or more virtual networks within a routing zone, which means a tenant can stretch its L2 applications across multiple racks within its routing zone. For virtual networks with Layer 3 SVI, the SVI is associated with a Virtual Routing and Forwarding (VRF) instance for each routing zone isolating the virtual network SVI from other virtual network SVIs in other routing zones. If you're using multiple routing zones, external system connections must be from leaf switches in the fabric. Routing between routing zones must be accomplished with external systems.
NEW QUESTION # 75
Referring to the exhibit, what needs to change in the IP fabric to make it a valid IP fabric?
- A. The IP fabric connections must be increased to a speed greater than 10 Gbps.
- B. The connection between the two spine nodes must be removed.
- C. The IP fabric must consist of only one device model throughout the fabric.
- D. The connection between the two spine nodes must be increased to 40 Gbps.
Answer: B
Explanation:
To make the IP fabric a valid IP fabric, the connection between the two spine nodes must be removed. This is because an IP fabric is a network topology that uses a spine-leaf architecture, where the spine devices are only connected to the leaf devices, and the leaf devices are only connected to the spine devices. This creates a non-blocking, high-performance, and scalable network that supports Layer 3 routing protocols such as BGP or OSPF. The connection between the two spine nodes in the exhibit violates the spine-leaf design principle and introduces unnecessary complexity and potential loops in the network.
NEW QUESTION # 76
Which attribute enables Juniper Apstra to scale and manage thousands of devices with a single server instance?
- A. Apstra is based on NGINX.
- B. Apstra is a distributed state system.
- C. Apstra is available as an OVA.
- D. Apstra is installed as a cloud resource.
Answer: B
Explanation:
The attribute that enables Juniper Apstra to scale and manage thousands of devices with a single server instance is that Apstra is a distributed state system. This means that Apstra uses a graph database to store the network topology and configuration data in a distributed and replicated manner across multiple server nodes. This allows Apstra to handle large-scale networks with high performance, reliability, and availability. Apstra also uses a stateful orchestration engine that ensures the network state is always consistent with the intent of the blueprint, which is the logical representation of the network design and behavior. Apstra can automatically detect and resolve any discrepancies between the desired and actual network state, as well as handle any changes or failures in the network. The other options are incorrect because:
A . Apstra is installed as a cloud resource is wrong because Apstra can be installed either as a cloud resource or as an on-premises resource. Apstra is available as a virtual machine image that can be deployed on various hypervisors, such as VMware ESXi, QEMU/KVM, Microsoft Hyper-V, or Oracle VirtualBox. Apstra can also be deployed on public cloud platforms, such as Amazon Web Services (AWS) or Microsoft Azure. However, the installation method does not affect the scalability of Apstra, which is determined by the distributed state system architecture.
B . Apstra is based on NGINX is wrong because Apstra is not based on NGINX, but on Python and Django. NGINX is a web server and reverse proxy that Apstra uses to serve the web user interface and the REST API. However, NGINX is not the core component of Apstra, and it does not affect the scalability of Apstra, which is determined by the distributed state system architecture.
C . Apstra is available as an OVA is wrong because Apstra is available as an OVF, not an OVA. An OVF (Open Virtualization Format) is a standard format for packaging and distributing virtual machine images. An OVA (Open Virtual Appliance) is a single file that contains the OVF and the virtual disk images. Apstra provides an OVF file that can be imported into various hypervisors, such as VMware ESXi, QEMU/KVM, Microsoft Hyper-V, or Oracle VirtualBox. However, the availability of Apstra as an OVF does not affect the scalability of Apstra, which is determined by the distributed state system architecture. Reference:
JUNIPER APSTRA ARCHITECTURE
Apstra Server Requirements/Reference
Juniper Networks Apstra 4.0 enhances the experience of users and operators
NEW QUESTION # 77
You are allowed to assign tags for which three objects? (Choose three.)
- A. Generic systems
- B. Interfaces
- C. Device profiles
- D. Virtual networks
- E. Property sets
Answer: A,B,D
Explanation:
In Apstra, tags are an intent-level metadata mechanism used to classify objects and drive automation and reuse. Within a data center blueprint, Apstra supports tagging multiple blueprint objects so operators can apply configuration or policy logic conditionally (for example, applying a connectivity template or a configlet based on a tag match). In this scenario, three valid taggable objects are virtual networks, interfaces, and generic systems.
Virtual network tagging is supported directly from the blueprint's virtual network table, enabling you to label virtual networks (such as "finance," "pci," or "dev") and then reference those tags elsewhere in blueprint operations and policy application. Interface tagging is also explicitly supported in the blueprint, allowing you to assign tags to switch interfaces and use those tags to control how templates, assignments, or other intent-driven operations apply to those ports. Finally, generic systems (which are modeled endpoint systems such as servers or external routers represented as "systems" in the blueprint) can be tagged so that downstream intent logic can distinguish system roles and apply the correct operations consistently across expansions and changes.
By contrast, property sets are structured data objects used for variable substitution and probe/configlet parameterization, not a primary target for operational tagging in the blueprint UI; and device profiles are catalog artifacts describing hardware/NOS compatibility rather than blueprint objects typically tagged for intent application.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/tag-interface-add-remove-datacenter.html
https://www.juniper.net/documentation/us/en/software/apstra5.0/apstra-user-guide/topics/task/tag-virtual-network-update.html
https://www.juniper.net/documentation/us/en/software/apstra5.0/apstra-user-guide/topics/topic-map/tag-system-add-remove-freeform.html
NEW QUESTION # 78
You are using Juniper Apstra to create security policies that create ACLs on the fabric devices. What are two valid objects that would be used within Apstra in this scenario? (Choose two.)
- A. Domain name
- B. Virtual network
- C. Routing zone
- D. Application signature
Answer: B,C
Explanation:
In Apstra 5.1, Security Policies express traffic-permit/deny intent between defined fabric endpoints, and Apstra compiles that intent into ACL enforcement on the appropriate switches (for example, on gateway interfaces for east-west segmentation and on border leaf interfaces for north-south controls). The objects you use to define that policy intent must correspond to fabric connectivity constructs that Apstra understands as endpoints in the blueprint's logical model.
Two such valid objects are Virtual Networks and Routing Zones. A virtual network represents a tenant segment (typically mapped into EVPN-VXLAN constructs such as VNI and associated IRB gateway when L3 is enabled). Policies between virtual networks are a common way to implement micro-segmentation or tier-based segmentation (web/app/db) within the same tenant boundary. A routing zone represents the L3 tenancy boundary (mapped to a VRF) and can be used to group and control connectivity at the tenant level, especially where policy needs to be expressed for aggregated tenant domains or for controls involving external connectivity.
"Domain name" and "application signature" are not endpoint objects for Apstra Security Policies in this context. They may exist in other security ecosystems, but Apstra's security intent model for ACL generation is based on topology and blueprint objects (routing zones, virtual networks, and endpoint definitions), which can then be rendered into Junos v24.4 firewall filter-style enforcement on the fabric devices.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/policy-security.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/routing-zones.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/virtual-networks.html
NEW QUESTION # 79
......
Juniper JN0-481 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
JN0-481 Free Exam Files Downloaded Instantly: https://www.passexamdumps.com/JN0-481-valid-exam-dumps.html
Practice Exams and Training Solutions for Certifications: https://drive.google.com/open?id=19fugYy4GaolliXGk3x7LIij1hgsTNjvx
