Get 010-151 Products Practice Material for 010-151 Exam Question Preparation
Most Reliable Cisco 010-151 Training Materials
NEW QUESTION 69
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. E - Fabric Interconnects A - PSUs
- B. D - Rack-Mounts - Servers
- C. C - Chassis1 - Servers
- D. A - Chassis 1
- E. B - Chassis 1 - PSUs
Answer: E
NEW QUESTION 70
What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?
- A. 40 km
- B. 10 km
- C. 550 m
- D. 80 km
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 71
Refer to the exhibit.
Where is the best place to see whether the system is ready for a Fabric Interconnect failover?
- A. C - Part Details
- B. B - L1 Connection
- C. E - High Availability Details
- D. A - Overall Status operable
- E. D - Access
Answer: C
NEW QUESTION 72
Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#
- A. Cisco IOS mode
- B. local management mode
- C. maintenance mode
- D. global configuration mode
- E. EXEC mode
Answer: E
NEW QUESTION 73
Which tool does a network administrator not need when installing hardware?
- A. cable wraps
- B. cable tester
- C. wrench set
- D. soldering iron with grounded tip
- E. needle-nose pliers
- F. PCMCIA memory
Answer: D
NEW QUESTION 74
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool.
Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- A. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors
- B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors
- C. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
- D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
Answer: C
NEW QUESTION 75
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9710
- B. MDS 9509
- C. MDS 9513
- D. MDS 9506
Answer: A
NEW QUESTION 76
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module IP address
- B. Module license information
- C. Module type
- D. Module status
- E. Module ports type
Answer: C,D
Explanation:
Explanation/Reference: https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/system_management/ command/reference/sm_cmd_show.html
NEW QUESTION 77
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. D - Capability Catalog
- B. B - Packages
- C. C - Images
- D. A - Installed Firmware
- E. E - Management Extension
Answer: B
NEW QUESTION 78
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. E - Fabric Interconnects A - PSUs
- B. D - Rack-Mounts - Servers
- C. C - Chassis1 - Servers
- D. A - Chassis 1
- E. B - Chassis 1 - PSUs
Answer: E
NEW QUESTION 79
Which Cisco MDS model supports the most Fibre Channel ports per chassis?
- A. MDS 9509
- B. MDS 9506
- C. MDS 9250i
- D. MDS 9513
Answer: D
NEW QUESTION 80
Which two statements about PCIe are true? (Choose two.)
- A. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.
- B. A link that is composed of four lanes is called an x4 link.
- C. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.
- D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.
- E. You can install a PCI Express x8 adapter into an x4 slot.
Answer: B,C
NEW QUESTION 81
On the Sensors page from the CIMC view, which four tabs are displayed to view further information? (Choose four.)
- A. Memory
- B. Power Supply
- C. LEDs
- D. Fan
- E. Temperature
- F. CPU
Answer: B,C,D,E
NEW QUESTION 82
Which Cisco UCS Virtual Interface Card Series is designed exclusively for the M5 generation?
- A. VIC 1200 Series
- B. VIC 1400 Series
- C. M81KR VIC
- D. VIC 1300 Series
Answer: B
NEW QUESTION 83
Which five things should the administrator verify after performing maintenance or replacing a blade server? (Choose five.)
- A. host OS boot status
- B. blade server status
- C. mezzanine card status
- D. hard drive status
- E. fan and power status
- F. memory DIMM status
- G. CPU status
Answer: B,C,D,F,G
NEW QUESTION 84
Which two external features are in the Cisco UCS C125 M5 Compute Node? (Choose two.)
- A. SD card slots
- B. Supercap unit
- C. PCIe Risers
- D. SAS/SATA drives
- E. USB 3.0 port
Answer: C,E
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C125/install/C125.pdf page 2
NEW QUESTION 85
Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)
- A. If the memory in a server is not fully populated, you can install DIMMs in any open slot.
- B. Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
- C. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
- D. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
Answer: C,D
NEW QUESTION 86
In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller?
(Choose two.)
- A. KVM Console port
- B. QSFP port
- C. Dedicated Management port
- D. Ethernet LOM port
- E. PCIe ports
Answer: B,E
Explanation:
Explanation
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-s-series- storage-servers/s3260-specsheet.pdf page 3
NEW QUESTION 87
Up to what speed can Category 5 UTP cable transmit data?
- A. 1000 Mb/s
- B. 10 Mb/s
- C. 10000 Mb/s
- D. 100 Mb/s
Answer: A
NEW QUESTION 88
Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?
- A. SFP+ Ethernet transceiver cable
- B. Ethernet cable
- C. console cable
- D. KVM cable
Answer: C
Explanation:
Explanation/Reference:
corrected.
NEW QUESTION 89
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
- A. Ctrl-C
- B. exit
- C. end
- D. Ctrl-L
- E. quit
Answer: C
NEW QUESTION 90
Refer to the exhibit.
Which call-out accurately shows the current running version of the Cisco UCS Manager management software?
- A. B - IO Module 1 running version 1.4(1m)
- B. A - UCS Manager running version 1.4(1m)
- C. C - Interface Card 1 running version 1.4(1m)
- D. D - Kernel running version 4.2(1)N(1.4m)
Answer: B
NEW QUESTION 91
Which tool is needed when servicing a UCS M5 server?
- A. PCle slot cover
- B. HDD removal tool
- C. M5 DIMM puller
- D. T-30 Torx driver
Answer: D
NEW QUESTION 92
Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)
- A. USB serial adapter
- B. monitor
- C. laptop
- D. keyboard
- E. Cisco DB-9-to-RJ-45 console cable
- F. KVM dongle
Answer: B,D,F
NEW QUESTION 93
......
LATEST 010-151 Exam Practice Material: https://www.passexamdumps.com/010-151-valid-exam-dumps.html
The Realest Study Materials 010-151 Dumps: https://drive.google.com/open?id=1yuclvpUNe0wRD8_GJb7JCL_j3L-2EDVF
