Cisco 300-410 Exam Dumps - PDF Questions and Testing Engine
Latest 300-410 Exam Dumps for Pass Guaranteed
Details of Cisco 300-410 Exam
Cisco 300-410 is a 90-minute exam, and the applicants are required to answer about 65 questions during this allocated time. These items can be presented in different formats, including multiple choice, testlets, drag and drop, or fill-in-the-blank. To earn the certification, the candidates have to gain the passing score of a minimum of 750 points on a scale of 1000. Please keep in mind that this test can be only taken in the Japanese and English languages. Also, the learners must pay the fee of $300. This payment allows them to register and schedule the exam through the Pearson VUE platform. After that, the students can choose the proper way of the delivery of this test. If you want to sit for this exam at the testing center, you can choose an in-person variant. On the other hand, you can opt for the online testing that will give you an opportunity to take the exam from any place at any time. Those individuals who do not achieve the pass mark will be asked to retake the 300-410 ENARSI test.
Exam Benefits
After you pass the Cisco 300-410, you will get the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certificate. Moreover, you will also satisfy the concentration requirement for the CCNP Enterprise validation. To obtain the second option, you also need to pass the core exam first (the Cisco 350-401). It’s to be mentioned that the CCNP Enterprise is a very important certification that you can’t miss if you want to become a professional in the networking field. This qualification helps you prove your knowledge and skills in the enterprise network technologies landscape and stay relevant. In addition, it covers core technologies as well as an enterprise focus area of the candidate’s choice. If you want, you can always go further and aim for the expert-level option afterward.
NEW QUESTION 84
An engineer configured two routers connected to two different service providers using BGP with default attributes. One of the links is presenting high delay, which causes slowness in the network. Which BGP attribute must the engineer configure to avoid using the high-delay ISP link if the second ISP link is up?
- A. WEIGHT
- B. AS-PATH
- C. LOCAL_PREF
- D. MED
Answer: C
NEW QUESTION 85
Refer to the exhibit.
A network engineer for AS64512 must remove the inbound and outbound traffic from link A during maintenance without closing the BGP session so that there ............ a backup link over link A toward the ASN.
Which BGP configuration on R1 accomplishes this goal?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 86
Drag and drop the operations from the left onto the locations where the operations are performed on the right.
Answer:
Explanation:
Explanation
Label Switch Router 1. Reads labels and forwards the packet based on the based on the label.
2. Performs PHP
Label Edge Router: 1 Assigns labels and unlabeled packets.
2. Handles traffic between multiple VPNs
NEW QUESTION 87
Refer to the exhibit.
A user cannot SSH to the router. What action must be taken to resolve this issue?
- A. Configure transport input ssh
- B. Configure ip ssh source-interface loopback0
- C. Configure ip ssh version 2
- D. Configure transport output ssh
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_01001.html
NEW QUESTION 88
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.
Answer:
Explanation:
NEW QUESTION 89
Refer to the exhibit.
A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYC interface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in exstart state. How does the administrator fix this issue?
- A. Configure to match the OSPF interface MTU settings on both routers.
- B. Configure to match the OSPF interface unique IP address and subnet mask on both routers.
- C. Configure to match the OSPF interface network types on both routers.
- D. Configure to match the OSPF interface speed and duplex settings on both routers.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13684-12.html
NEW QUESTION 90
Refer to the exhibit.
Which configuration denies Telnet traffic to router 2 from 198A:0:200C:: 1/64?
- A. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host 201A:0:205C::1/64
! int Gi0/0
Ipv6 access-map Deny_Telnet in
! - B. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host 201A:0:205C::1/64 eq telnet
! int Gi0/0
Ipv6 access-map Deny_Telnet in
! - C. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host 201A:0:205C::1/64 eq telnet
! int Gi0/0
Ipv6 traffic-filter Deny_Telnet in
! - D. Ipv6 access-list-Deny_Telnet sequence 10 deny tcp host 198A:0:200C::1/64 host 201A:0:205C::1/64
! int Gi0/0
Ipv6 traffic-filter Deny_Telnet in
!
Answer: B
NEW QUESTION 91
Refer to the exhibit. The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Layer 3 Technologies
NEW QUESTION 92 
Refer to the exhibit. Which action resolves intermittent connectivity observed with the SNMP trap rackets?
- A. Decrease the committed burst size of the mgmt class map.
- B. Increase the CIR of the mgmt class map.
- C. Add one new entry in the ACL 120 to permit the UDP port 161.
- D. Add a new class map to match TCP traffic.
Answer: B
Explanation:
Section: Mixed Questions
NEW QUESTION 93
Refer to the exhibit.
An engineer has configured DMVPN on a spoke router. What is the WAN IP address of another spoke router within the DMVPN network?
- A. 192.168.1.1
- B. 172.18.46.2
- C. 192.168.1.4
- D. 172.18.16.2
Answer: B
NEW QUESTION 94
Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION 95
Exhibit:
An engineer configured R2 and R5 as route reflectors and noticed that not all routes are sent to R1 to advertise to the eBGP peers. Which iBGP routers must be configured as route reflectors to advertise all routes to restore reachability across all networks?
- A. R1 and R4
- B. R2 and R5
- C. R4 and R5
- D. R1 and R5
Answer: C
Explanation:
When R2 & R5 are route reflectors (RRs), routes from R4 & R8 are advertised to R5 and R5 advertises to R2. But R2 would drop them as R2 is also a RR. Thereforesome routes are missing on R1 to advertise to eBGP peers.
Good reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2015/pdf/TECRST-2310.pdf Route reflectors (RR) must be fully iBGP meshed so we cannot configure RR on both R1 and R5.
We should choose routers at the center of the topology RRs, in this case R4 & R5.
NEW QUESTION 96
Refer to the exhibit.
The server for the finance department is not reachable consistently on the 200.30.40.0/24 network and after every second month it gets a new IP address. Which two actions must be taken to resolve this Issue? (Choose two.)
- A. Configure the router to exclude a server IP address.
- B. Configure the server to use DHCP on the network with default gateway 200 30.40.100.
- C. Configure the server with a static IP address and default gateway.
- D. Configure the server to use DHCP on the network with default gateway 200 30.30.100.
- E. Configure the router to exclude a server IP address and default gateway.
Answer: A,C
NEW QUESTION 97
Refer to the exhibit.
ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?
- A. Start-time immediately
- B. Start-time 00:00
- C. Start-time now
- D. Start-time 0
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_icmp_echo.html
NEW QUESTION 98
Drag and drop the MPLS VPN device types from me left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION 99
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday - Sunday night hours only. Which configuration resolves the issue?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 100
......
The Cisco ENARSI 300-410 exam is intended for candidates of the CCNP Enterprise certification that paves pathways for those dreaming of careers in computer networking. It is the best option for those who want to specialize in the area of implementing Cisco Enterprise advanced routing and services.
Reliable CCNP Enterprise 300-410 Dumps PDF Dec 17, 2021 Recently Updated Questions: https://www.passexamdumps.com/300-410-valid-exam-dumps.html
Pass Your Cisco 300-410 Exam with Correct 215 Questions and Answers: https://drive.google.com/open?id=18ZSEn9ReFzuc8x_Syp32jEexDfpWSg-W
