201 Exam Info and Free Practice Test All-in-One Exam Guide Oct-2024
Pass F5 201 Actual Free Exam Q&As Updated Dump Oct 17, 2024
The F5 201 exam consists of multiple-choice questions, and candidates are required to complete it within two hours. The questions are designed to test the candidate's understanding of various concepts related to BIG-IP administration, including system setup and configuration, network and application services, security, and troubleshooting. 201 exam is challenging, and candidates are advised to prepare thoroughly using study materials and practice tests.
F5 201 (BIG-IP Administrator) certification is a highly respected credential for IT professionals who want to demonstrate their expertise in managing F5 BIG-IP Application Delivery Controllers (ADCs). BIG-IP Administrator Exam certification is designed to validate the skills required to deploy, manage, and troubleshoot BIG-IP systems in complex network environments. 201 exam covers a broad range of topics, including networking concepts, security protocols, and application delivery fundamentals.
NEW QUESTION # 81
Assuming that systems are synchronized, which action could take place if thEl eo fv ae ir lcable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems.
- A. Whether or not network failElover is enabled, the standby system will stay in standby mode.
- B. Whether or not network failElover is enabled, the standby system will assume the active mode.
- C. If network failElover is enabled, the standby system will assume the active mode.
- D. If network failElover is enabled, the standby system will go into active mode but only until the network recovers.
Answer: A
NEW QUESTION # 82
A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.
- A. 172.16.20.1:80
- B. 172.16.20.2:80
- C. 172.16.20.3:80
- D. 172.16.20.5:80
- E. 172.16.20.4:80
Answer: E
NEW QUESTION # 83
As a part of the Setup Utility, the administrator sets the host name for the BEl IGP.
What would be the result if the two systems in a redundant pair were set to the
same host name.
- A. The first
time
the systems
are synchronized
the receiving
system will be assigned the same selfElIP addresses as the source system. - B. Host names do not matter in redundant pair communication.
- C. In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between the systems.
- D. When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.
Answer: A
NEW QUESTION # 84
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?
- A. Device root password
- B. SSL private keys
- C. QKViewfile
- D. bigip.license file
Answer: C
NEW QUESTION # 85
A virtual server is defined using a sourceEladdress based persistence profile. The
last five connections were A, B, C, A, C . Given the conditions shown in the graphic,
if a client with IP address 205.12.45.52 opens a connection to the virtual server,
which member will be used for the connection.
- A. 10.10.20.5:80
- B. 10.10.20.1:80
- C. 10.10.20.4:80
- D. 10.10.20.3:80
- E. 10.10.20.2:80
Answer: E
NEW QUESTION # 86
Which three methods can be used for initial access to a BIGElIP system. (Choose three.)
- A. HTTPS access to the management port
- B. HTTP access to the management port
- C. SSH access to any of the switch ports
- D. CLI access to the serial console port
- E. HTTPS access to any of the switch ports
- F. HTTP access to any of the switch ports
- G. SSH access to the management port
Answer: A,D,G
NEW QUESTION # 87
Where is the loadbalancing mode specified?
- A. within the pool member definition
- B. within the node definition
- C. within the pool definition
- D. within the virtual server definition
Answer: C
NEW QUESTION # 88
A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.
Which action should the BIG-IP Administrator recommend?
- A. Create a UCS archive and open an F5 Support request
- B. Create a UCS archive and upload to Health
- C. Verify the TMOS version and review the release notes
- D. Generate a view and upload to Heath
Answer: D
NEW QUESTION # 89
Which three properties can be assigned to nodes. (Choose three.)
- A. loadElbalancing mode
- B. priority values
- C. ratio values
- D. connection limits
- E. health monitors
Answer: C,D,E
NEW QUESTION # 90
A BIG-IP Administrator upgrades the BIG-IP LTM to a newer software version. After the administrator reboots into the new volume, the Configuration fails to load. Why is the Configuration failing to load?
- A. The license needs to be reactivated before the upgrade.
- B. A minimum of at least two reboots is required.
- C. Connectivity to the DNS server failed to be established.
- D. The upgrade was performed on the standby unit.
Answer: A
NEW QUESTION # 91
You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG IP supplied cookie.
Which four are profiles that would normally be included in the virtual server's definition? (Choose four.)
- A. ClientSSL
- B. CookieBased Persistence
- C. HTTP
- D. HTTPS
- E. ServerSSL
- F. TCP
Answer: A,B,C,F
NEW QUESTION # 92
Which type of Virtual Server requires the use of a FastL4 profile?
- A. Standard
- B. Performance (HTTP)
- C. Stateless
- D. Performance (Layer 4)
Answer: D
NEW QUESTION # 93
Refer to the exhibit.
A user notifies the BIG-IP Administrator that http://remote company.com is NOT accessible. Remote access to company resources must be encrypted.
What should the BIG-IP Administrator do to fix the issue?
- A. Change the Listening Port on remote.company.com_vs to Port 80
- B. Change the Type of the Virtual Server remote.company.com_vs to Forwarding Requiring all traffic to be HTTPS access requires HTTP requests to be redirected directly to HTTPS.
- C. Add an iRule to remote.company.com_vs to redirect Traffic to HTTPS
- D. Add a Pool to the Virtual Server remote.company.com_VS
Answer: C
NEW QUESTION # 94
For a given Virtual Server, the BIG-IP must perform SSL Offload and negotiate secure communication overTLSvl.2only.
What should the BIG-IP Administrator do to meet this requirement?
- A. Configure a custom SSL Profile (Client) and select no TLSvl in the options list
- B. Configure a custom SSL Profile (Client) with a custom TLSV1.2 cipher string
- C. Configure a custom SSL Profile (Server) and select no TLSvl in the options list
- D. Configure a custom SSL Profile (Server) with a custom TLSV1.2 cipher string
Answer: B
Explanation:
no TLSvl only disables TLS1.0, TLS1.1 is still used and does not meet the requirements.
NEW QUESTION # 95
A BIG-IP Administrator must configure the BIG-IP device to send system log messages to a remote syslog server In addition, the log messages need to be sent over TCP for guaranteed delivery. What should the BIG-IP Administrator configure?
- A. Remote Logging
- B. syslog-ng
- C. Request Logging Profile
- D. HSL Logging
Answer: A
NEW QUESTION # 96
The BIG-IP Administrator disable all pool members in a pool Users are still able to reach the pool members.
What is allowing users to continue to reach the disabled poo! members?
- A. A persistence profile on the Pool
- B. A slow to time on Pool
- C. A slow ramp time on virtual Server
- D. A persistence profile on the Virtual Server
Answer: D
NEW QUESTION # 97
A BIG-IP Administrator is conducting maintenance on one BIG-IP appliance in an HA Pair. Why should the BIG-IP Administrator put the appliance into FORCED_OFFLINE state?
- A. To preserve existing connections to Virtual Servers and reduce the CPU load
- B. To allow new connections to Virtual Servers and ensure the appliance becomes active
- C. To terminate connections to the management IP and decrease persistent connections
- D. To terminate existing connections to Virtual Servers and prevent the appliance from becoming active
Answer: D
NEW QUESTION # 98
......
F5 201: BIG-IP Administrator exam is an important certification for professionals who want to advance their careers in networking and security. BIG-IP Administrator Exam certification program is designed to provide candidates with the necessary skills and knowledge to work with F5 BIG-IP products. 201 exam covers topics such as administering BIG-IP, configuring BIG-IP objects, and securing applications with BIG-IP. Additionally, the certification program provides candidates with the ability to troubleshoot issues in F5 networks.
Online Questions - Valid Practice 201 Exam Dumps Test Questions: https://www.passexamdumps.com/201-valid-exam-dumps.html
Latest 201 Actual Free Exam Updated 255 Questions: https://drive.google.com/open?id=1k23eR8jD7HSjvLBAITEaqIDiOwviw6uV
