100% PASS RATE FCP in Security Operations FCP_FAZ_AN-7.4 Certified Exam DUMP with 58 Questions
Updates For the Latest FCP_FAZ_AN-7.4 Free Exam Study Guide!
Fortinet FCP_FAZ_AN-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 18
What statements are true regarding the "store and upload" log transfer option between FortiAnalyzer and FortiGate? (Choose three.)
- A. Disk logging is enabled by default on the FortiGate.
- B. Only FortiGate models with hard disks can send logs to FortiAnalyzer using the store and upload option.
- C. Both secure communications methods (SSL and IPsec) allow the store and upload option.
- D. All FortiGates can send logs to FortiAnalyzer using the store and upload option.
- E. Disk logging is enabled on the FortiGate through the CLI only.
Answer: B,C,E
NEW QUESTION # 19
Exhibit.
What can you conclude about the output?
- A. There are more traffic logs than event logs.
- B. The output is ADOM specific
- C. Both messages and logs are almost finished indexing.
- D. The message rate being lower that the log rate is normal.
Answer: D
Explanation:
In this output, we see two diagnostic commands executed on a FortiAnalyzer device:
* diagnose fortilogd lograte: This command shows the rate at which logs are being processed by the FortiAnalyzer in terms of log entries per second.
* diagnose fortilogd msgrate: This command displays the message rate, or the rate at which individual messages are being processed.
The values provided in the exhibit output show:
* Log rate (lograte): Consistently high, showing values such as 70.0, 132.1, and 133.3 logs per second over different time intervals.
* Message rate (msgrate): Lower values, around 1.4 to 1.6 messages per second.
Explanation:
* Interpretation of log rate vs. message rate: In FortiAnalyzer, the log rate typically refers to the rate of logs being stored or indexed, while the message rate refers to individual messages within these logs.
Given that a single log entry can contain multiple messages, it's common to see a lower message rate relative to the log rate.
* Understanding normal operation: In this case, the message rate being lower than the log rate is expected and typical behavior. This discrepancy can arise because each log entry may bundle multiple related messages, reducing the message rate relative to the log rate.
Conclusion
* Correct Answer:A. The message rate being lower than the log rate is normal.
* This aligns with the normal operational behavior of FortiAnalyzer in processing logs and messages.
There is no indication that both logs and messages are nearly finished indexing, as that would typically show diminishing rates toward zero, which is not the case here. Additionally, there's no information in this output about specific ADOMs or a comparison between traffic logs and event logs. Thus, options B, C, and D are incorrect.
References:
* FortiOS 7.4.1 and FortiAnalyzer 7.4.1 command guides for diagnose fortilogd lograte and diagnose fortilogd msgrate.
NEW QUESTION # 20
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. The sqlplugind daemon is behind in log indexing by two logs
- B. The received rate is almost at its maximum for this device
- C. Raw logs are reaching FortiAnalyzer faster than they can be indexed
- D. Logs are being dropped
Answer: C
NEW QUESTION # 21
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin" and coming from Laptop1.
Which filter will achieve the desired result?
- A. operation-login & dstip==10.1.1.210 & userl-admin
- B. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
- C. operation-login & performed_on=="GUI(10.1.1.210)' & user!=admin
- D. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
Answer: B
NEW QUESTION # 22
An administrator has configured the following settings:
config system global
set log-checksum md5-auth
end
What is the significance of executing this command?
- A. This command records the log file MD5 hash value.
- B. This command records the log file MD5 hash value and authentication code.
- C. This command encrypts log transfer between FortiAnalyzer and other devices
- D. This command records passwords in log files and encrypts them.
Answer: B
NEW QUESTION # 23
Exhibit.
Which statement about the event displayed is correct?
- A. The security event risk is considered open.
- B. The risk source is isolated.
- C. The security risk was blocked or dropped.
- D. An incident was created from this event.
Answer: C
Explanation:
In FortiOS and FortiAnalyzer logging systems, when an event has a status of"Mitigated"in theEvent Status column, it typically indicates that the system took action to address the identified threat. In this case, theWeb Filterblocked the web request to a suspicious destination, and the event status "Mitigated" confirms that the action was successfully implemented to neutralize or block the security risk.
Let's review the answer options:
* Option A: The risk source is isolated.
* This is incorrect because "isolated" would imply that FortiGate took further steps to prevent the source device from communicating with the network. There is no indication of isolation in this event status.
* Option B: The security risk was blocked or dropped.
* This is correct. The"Mitigated"status, along with theWeb Filterevent type and the accompanying description, implies that the FortiGate or FortiAnalyzer successfully blocked or dropped the suspicious web request, which corresponds to the term "mitigated."
* Option C: The security event risk is considered open.
* This is incorrect because an open status would indicate that no action was taken, or the threat is still present. The "Mitigated" status indicates that the threat has been addressed.
* Option D: An incident was created from this event.
* This option is not correct or evident based on the given display. Although FortiAnalyzer or FortiGate could escalate certain events to incidents, this is not indicated here.
References:
* The FortiOS 7.4.1 and FortiAnalyzer 7.4.1 documentation specify that"Mitigated"status in logs means the identified threat was handled, usually by blocking or dropping the action associated with the event, particularly with Web Filter and Security Policy logs.
NEW QUESTION # 24
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally? (Choose two.)
- A. Report scheduling
- B. Mail server
- C. Output profile
- D. SFTP server
Answer: B,C
NEW QUESTION # 25
Exhibit.
Based on the partial outputs displayed, which devices can be members of a FotiAnalyzer Fabric?
- A. FortiAnalyzer2 and FortiAnalyzer3
- B. FortiAnalyzer1 and FortiAnalyzer2
- C. FortiAnalayzer1 and FortiAnalyzer3
- D. All devices listed can be members.
Answer: D
Explanation:
In a FortiAnalyzer Fabric, devices can participate in a cluster or grouping if they meet specific compatibility criteria. Based on the outputs provided, let's evaluate these criteria:
All three devices, FortiAnalyzer1, FortiAnalyzer2, and FortiAnalyzer3, are running version v7.4.1-build0238, which is the same across the board. This version alignment is crucial because FortiAnalyzer Fabric requires that devices run compatible firmware versions for seamless communication and management.
Platform Type and Configuration:
All three devices are configured as Standalone in the HA mode, which allows them to operate independently but does not restrict their participation in a FortiAnalyzer Fabric. Each device is also on the FAZVM64-KVM platform type, ensuring hardware compatibility.
Global Settings:
Key settings such as adm-mode, adm-status, and adom-mode are consistent across all devices (adm-mode: normal, adm-status: enable, adom-mode: normal), which aligns with requirements for fabric integration and role assignment flexibility.
Each device also has the log-forward-cache-size set, which is relevant for forwarding logs within a fabric environment.
Based on the above analysis, all devices (FortiAnalyzer1, FortiAnalyzer2, and FortiAnalyzer3) meet the requirements to be part of a FortiAnalyzer Fabric.
NEW QUESTION # 26
Which database language does FortiAnalyzer support for the purposes of logging and reporting?
- A. XML
- B. LDAP
- C. SSH
- D. SQL
Answer: D
NEW QUESTION # 27
You must find a specific security event log in the FortiAnalyzer logs displayed in FortiView, but, so far, you have been uncuccessful.
Which two tasks should you perform to investigate why you are having this issue? (Choose two.)
- A. Rebuild the SQL database and check FortiView.
- B. Check logs in the Log Browse
- C. Open .gz log files in FortiView.
- D. Review the ADOM data policy
Answer: A,C
NEW QUESTION # 28
After a generated a repot, you notice the information you were expecting to see in not included in it. However, you confirm that the logs are there:
Which two actions should you perform? (Choose two.)
- A. Disable auto-cache.
- B. Test the dataset.
- C. Check the time frame covered by the report.
- D. Increase the report utilization quota.
Answer: B,C
Explanation:
When a generated report does not include the expected information despite the logs being present, there are several factors to check to ensure accurate data representation in the report.
Option A - Check the Time Frame Covered by the Report:
Reports are generated based on a specified time frame. If the time frame does not encompass the period when the relevant logs were collected, those logs will not appear in the report. Ensuring the time frame is correctly set to cover the intended logs is crucial for accurate report content.
Conclusion: Correct.
Option B - Disable Auto-Cache:
Auto-cache is a feature in FortiAnalyzer that helps optimize report generation by using cached data for frequently used datasets. Disabling auto-cache is generally not necessary unless there is an issue with outdated data being used. In most cases, it does not directly impact whether certain logs are included in a report.
Conclusion: Incorrect.
Option C - Increase the Report Utilization Quota:
The report utilization quota controls the resource limits for generating reports. While insufficient quota might prevent a report from generating or completing, it does not typically cause specific log entries to be missing. Therefore, this option is not directly relevant to missing data within the report.
Conclusion: Incorrect.
Option D - Test the Dataset:
Datasets in FortiAnalyzer define which logs and fields are pulled into the report. If a dataset is misconfigured, it could exclude certain logs. Testing the dataset helps verify that the correct data is being pulled and that all required logs are included in the report parameters.
Conclusion: Correct.
Conclusion:
Correct Answe r : A. Check the time frame covered by the report and D. Test the dataset.
These actions directly address the issues that could cause missing information in a report when logs are available but not displayed.
Reference:
FortiAnalyzer 7.4.1 documentation on report generation settings, time frames, and dataset configuration.
NEW QUESTION # 29
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)
- A. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.
- B. Logs will be presented in both ADOMs immediately after the move.
- C. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
- D. Archived logs will be moved to ADOM1 from the root ADOM automatically.
Answer: B,D
NEW QUESTION # 30
What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons? (Choose three)
- A. TACACS+
- B. RADIUS
- C. LDAP
- D. Local
- E. PKI
Answer: A,B,C
NEW QUESTION # 31
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?
- A. A new Infected entry is added for the corresponding endpoint.
- B. FortiAnalyzer flags the associated host for further analysis.
- C. The detection engine classifies those logs as Suspicious
- D. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
Answer: D
NEW QUESTION # 32
What must be configured to be able to send notifications about incident updates?
- A. A playbook using an Incident_Trigger
- B. Back-end email server
- C. Fabric connector
- D. Output profile
Answer: C
NEW QUESTION # 33
......
Best FCP_FAZ_AN-7.4 Exam Preparation Material with New Dumps Questions https://www.passexamdumps.com/FCP_FAZ_AN-7.4-valid-exam-dumps.html
Fast Exam Updates FCP_FAZ_AN-7.4 dumps with PDF Test Engine Practice https://drive.google.com/open?id=1gQ2DMMSQyYwD3OOUmm0stbhD59VyEGpt
